Testing TPS - Which wires (picture attached)
#1
Member
Thread Starter
Join Date: Jan 2007
Location: Indpls, IN
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Jamaican Yellow Firebird
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.42
Testing TPS - Which wires (picture attached)
I am trying to test my tps. I have 3 wires in a triangular pattern. Which wires do I test for voltage?
#2
Junior Member
Join Date: Oct 2010
Location: Maine
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 irocz,87irocz,05 tacoma trd
Engine: 5.7's,5.0.4.0
Transmission: a4, an sixspeed
Axle/Gears: 2.73
Re: Testing TPS - Which wires (picture attached)
pos neg, just try each one, it will tell u the volts
#3
Member
Thread Starter
Join Date: Jan 2007
Location: Indpls, IN
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Jamaican Yellow Firebird
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.42
Re: Testing TPS - Which wires (picture attached)
I assume just push through the wire insulation?
Also assume to keep the plug in the tps and turn on the key?
Also assume to keep the plug in the tps and turn on the key?
#4
Member
Thread Starter
Join Date: Jan 2007
Location: Indpls, IN
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Jamaican Yellow Firebird
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.42
Re: Testing TPS - Which wires (picture attached)
Okay. At idle setting (car not running, key on, no throttle) I am reading 4.44vAt WOT, I am reading 0.49vWhy is it reversed? Isn't the larger reading at WOT?????
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM