zz383 Engine with Commander 950 engine management
06-02-2011, 05:14 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
zz383 Engine with Commander 950 engine management
Do any of you use this setup?
I have a zz383 rated at 425hp.. ( i really dont know with what equipment the engine is rated)
And i have a complete Holley Stealth ram intake with the Commander 950 PRO engine management system ?
So the real question is if anyone have any experience with this setup. ?
And how will the tunability affect the power and TQ?
I beilive that with the fuel i am going to run i will be able to run up to about 40 degrees of timing advance, if that would help HP numbers...
but the real question is if anyone here have this setup, and have tuned it on a dyno ? and hp/tq numbers ?
I have a zz383 rated at 425hp.. ( i really dont know with what equipment the engine is rated)
And i have a complete Holley Stealth ram intake with the Commander 950 PRO engine management system ?
So the real question is if anyone have any experience with this setup. ?
And how will the tunability affect the power and TQ?
I beilive that with the fuel i am going to run i will be able to run up to about 40 degrees of timing advance, if that would help HP numbers...
but the real question is if anyone here have this setup, and have tuned it on a dyno ? and hp/tq numbers ?
06-03-2011, 08:56 AM
#2
Senior Member
Re: zz383 Engine with Commander 950 engine management
i have that combo on order, i was hoping to get atleast 500 hp... but do a search, there are others who have it with results posted.. good luck...
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM
