Error Code 36
08-06-2013, 02:59 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2013
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Error Code 36
My 1987 Z28 IROC 5.7 350 began to run rich and stall out when put in gear.
I brought the car to the mechanic who told me I need a new MAF. Once this was complete, I went to pick up the car and it would not start. Fast forward a week or 2 and we discover there was a TSB for the burnoff relay. We put a new relay in and it seems better but not totally solved. We disconnect the battery, let the ECM reset and she's running better. However, I am still getting the SES light more often than not, and it is still error code 36. This goes well beyond my technical expertise and I don't want to bring it back to this shop anymore.
Any help appreciated, and please remember I am not very mechaniclly or technically inclined. Thank you.
I brought the car to the mechanic who told me I need a new MAF. Once this was complete, I went to pick up the car and it would not start. Fast forward a week or 2 and we discover there was a TSB for the burnoff relay. We put a new relay in and it seems better but not totally solved. We disconnect the battery, let the ECM reset and she's running better. However, I am still getting the SES light more often than not, and it is still error code 36. This goes well beyond my technical expertise and I don't want to bring it back to this shop anymore.
Any help appreciated, and please remember I am not very mechaniclly or technically inclined. Thank you.
08-06-2013, 03:03 PM
#2
Re: Error Code 36
you will either need to go through the trouble tree or take it back and have them check the wiring and ecm.
http://chevythunder.com/maf_code_36.htm
http://chevythunder.com/maf_code_36.htm
Thread
Thread Starter
Forum
Replies
Last Post