installing new injectors- gasket and egr question
05-29-2014, 10:07 PM
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2012
Location: Clark NJ
Posts: 877
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Pontiac Transam GTA Notchback
Engine: 2003 Chevy 5.3 Vortec (325 cu)
Transmission: 4L60E
Axle/Gears: 3.27
installing new injectors- gasket and egr question
So I just bought new Bosch III injectors from Southbay for my L98 TPI b/c my stock ones leak. Well anyway I need gaskets so I am getting Felpro MS93035-1. My dad brought up an interesting point, will the egr valve cause a problem of any kind depending on whether it is positive or negative backpressure with this gasket, or does one have nothing to do with the other? 
I figured I would ask, can't hurt right, lol. I am not mr. goodwrench but I kinda know my way around this engine.
I figured I would ask, can't hurt right, lol. I am not mr. goodwrench but I kinda know my way around this engine.
06-01-2014, 09:21 AM
#2
Re: installing new injectors- gasket and egr question
If the EGR gasket matches the base of the valve and the openings of the intake, there should be no problems regardless of the valve type.
06-01-2014, 09:33 AM
#3
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2012
Location: Clark NJ
Posts: 877
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Pontiac Transam GTA Notchback
Engine: 2003 Chevy 5.3 Vortec (325 cu)
Transmission: 4L60E
Axle/Gears: 3.27
Re: installing new injectors- gasket and egr question
Okay thanks, and thanks for taking the time to answer. 
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
08-23-2015 11:49 AM