Chevy valley pan gasket?
09-11-2004, 10:55 AM
#1
Member
Thread Starter
Join Date: Jan 2003
Location: Hartland MI
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 355
Transmission: 700r4
Axle/Gears: 3.73
Chevy valley pan gasket?
Got a HSR yesterday, looking over the base I was thinking the runners are exposed to hot splash. Is there a chevy oil pan gasket made similar to what you use for other engs? Anyone made one for their HSR? Did not come up with on using search.
Or does the retainer double as a splash guard? I use to working with non-roller blocks.
Or does the retainer double as a splash guard? I use to working with non-roller blocks.
09-11-2004, 11:48 AM
#2
TGO Supporter
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 4,803
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
We don't have spash shields as you think of them. There are lifter valley baffles, such as the one made by Moroso.
http://store.summitracing.com/defaul...moroso&x=0&y=0
http://store.summitracing.com/defaul...moroso&x=0&y=0
09-11-2004, 01:36 PM
#3
Member
Thread Starter
Join Date: Jan 2003
Location: Hartland MI
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 355
Transmission: 700r4
Axle/Gears: 3.73
Originally posted by Stekman
We don't have spash shields as you think of them. There are lifter valley baffles, such as the one made by Moroso.
http://store.summitracing.com/defaul...moroso&x=0&y=0
We don't have spash shields as you think of them. There are lifter valley baffles, such as the one made by Moroso.
http://store.summitracing.com/defaul...moroso&x=0&y=0
Only one listed is for 18 deg heads and states:
* Cannot be used with roller lifters.
http://store.summitracing.com/defaul...ffles&x=21&y=6
09-11-2004, 02:25 PM
#4
TGO Supporter
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 4,803
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Look carefully. It says: Standard implies 23°.
You'd have to mock something up to use it with factory spider stuff. I've looked into it for a little bit, not long enough to actually figure something out.
Chevrolet: 262-400, standard and 18 degree heads, lifter valley baffle
You'd have to mock something up to use it with factory spider stuff. I've looked into it for a little bit, not long enough to actually figure something out.
09-11-2004, 07:16 PM
#5
Member
Thread Starter
Join Date: Jan 2003
Location: Hartland MI
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 355
Transmission: 700r4
Axle/Gears: 3.73
Was hoping to find one molded with the 2 intake gaskets into one peice. Do appreciate the input though.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM
