TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
305 TPI with 700r4. In the morning, starts right up. I drive the 30 minutes to work, and it dies right before I get there, but only at a complete stop normally. Idle is at 500. Will take a few minutes to get it up and running again. Already replaced the coil. When it doesnt start, it cranks, but never lights. Also, theres a white wire coming out of the engine harness into a gray plug on the coil. The diagram says its something for gauges, but it was grounding against the valve cover, causing the motor to die. Ive since replaced that, but am still having random stall issues. When it dies, its almost like somone turned the key off. This is my work car, so I need it up and running ASAP. ANy help would be appreciated.
Did you ever get this problem fixed? I'm having the same one.
__________________ My Cars.
1992 Chevrolet Camaro Rs 305 Tbi, 5speed manual. leather interior.
original GM Arctic White on exterior and engine Bay, Original 305 Tbi Rebuilt bored .20 over. With rebuilt T-5
1984 z28, 305, automatic, g80, rear, 52k miles all original!
Cool to hear you got the problem figured out, thats what i was gonna suggest. You did get a quality module, right? They are notorious for failure, may want to get a backup, lol.
what up dean. man i like success stories, kinda like one being married. but my marriage with my car is just crazy. Her Name is LENNET. She likes it when i go fast, and loves it when i dump 93 octane fuel in her. BUt shes not working. I had a question for Kcallais. did you test your module b4 replace or just a simple hunch swap
Last edited by transam85dudeman; 03-20-2009 at 01:19 AM.