Go Back   Third Generation F-Body Message Boards > Tech Boards > TPI

TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools
Old 06-25-2009, 05:54 PM   #1
Junior Member
 
ngonnelly's Avatar
 
Join Date: Jan 2008
Location: Bellmore Long Island New York Hell yea
Posts: 45
Car: 1990 Camaro IROC-Z28
Engine: 5.7L 350cid
Transmission: auto
Axle/Gears: i think 3.42

Classifieds Rating: (0)
injectors proms and knock

so i did a 305 to 350 tpi to tpi i need to replace the injectors were can i get stock injectors and were can i get a 350 prom and iv got the knock sesnor wich doesnt respond with the 305 computer chip i think beacuse i hade put in the old 305 knock and it ran so nice but still bad but i got a knock for a 350 and its as if its not there. what kind of prom shuold i get so iv got to repalcethe injectors and prom is that it should my car be runing nicely after that ?
This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!
ngonnelly is offline vBGarage Page   Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
Old 06-26-2009, 04:51 PM   #2
Junior Member
 
Join Date: Nov 2004
Location: south dakota
Posts: 29
Car: 1991 z28
Engine: 5.7 tpi
Transmission: th700r4
Axle/Gears: 3.23

Classifieds Rating: (0)
Re: injectors proms and knock

As for the injectors, I recently bought a set of 22lbs. bosch III's from South Bay Fuel Injectors (reconditioned) for my 91 Z28 5.7 and have about 1300 miles on them. No complaints yet. I think the price was about $150 for the set with all necessary O rings. Shipping was fast! Randy
randyz91 is offline vBGarage Page   Reply With Quote
Old 06-26-2009, 08:41 PM   #3
Sponsor
 
Join Date: Nov 2008
Posts: 255

Classifieds Rating: (0)
Re: injectors proms and knock

Quote:
Originally Posted by ngonnelly View Post
so i did a 305 to 350 tpi to tpi i need to replace the injectors were can i get stock injectors and were can i get a 350 prom and iv got the knock sesnor wich doesnt respond with the 305 computer chip i think beacuse i hade put in the old 305 knock and it ran so nice but still bad but i got a knock for a 350 and its as if its not there. what kind of prom shuold i get so iv got to repalcethe injectors and prom is that it should my car be runing nicely after that ?
Hi, if you are interested in a set of the bosch design lll's we are running a special. Just use the discount code TG11 during the checkout process and you will receive a 10% discount on your purchase. (discount good until June 30th)

www.southbayfuelinjectors.com
southbay08 is online now vBGarage Page   Reply With Quote
Old 06-27-2009, 07:44 AM   #4
Junior Member
 
ngonnelly's Avatar
 
Join Date: Jan 2008
Location: Bellmore Long Island New York Hell yea
Posts: 45
Car: 1990 Camaro IROC-Z28
Engine: 5.7L 350cid
Transmission: auto
Axle/Gears: i think 3.42

Classifieds Rating: (0)
Re: injectors proms and knock

Thanks this is amazing news there located in the town next to me I wonder if they have a store front this is grate news thank you thank you now does any one know about prom and were. I could get a 350 prom for my ECM
ngonnelly is offline vBGarage Page   Reply With Quote
Old 07-18-2009, 07:11 PM   #5
Junior Member
 
Join Date: Mar 2009
Location: Wilmington, DE
Posts: 98
Car: 87 IROC-Z
Engine: jasper 350
Transmission: 700R-4
Axle/Gears: 2.73 posi

Classifieds Rating: (0)
Re: injectors proms and knock

i know this an old post but i just did a swap from a LB9 305 TPI to a 350 tpi. It is spark knocking in higher RPMS (not getting enough fuel). I am using the stock 305 injectors. my friend just got a replacement set for a stock 305 from southbay and he recommended southbay for my injectors. My question is, what injectors do i get from southbay? To me it seems like they have a few sets for a 350 tpi.
__________________


1987 Camaro IROC-Z
Exterior
350/700R4
T-Tops
Flowmaster Exhaust
Smoked Tail Lights
180 Degree Thermostat
2055 Hooker Headers
Front Slotted Disk Brakes with HAWKS Pads

Interior
New Black carpet all around
Black Plastics all around
4th gen seats
Pioneer Headunit
Pioneer 4x6 speakers in dash
Kenwood 6x9 speakers in sail panels

87SnowFlake is offline vBGarage Page   Reply With Quote
Old 07-18-2009, 07:21 PM   #6
Junior Member
 
ngonnelly's Avatar
 
Join Date: Jan 2008
Location: Bellmore Long Island New York Hell yea
Posts: 45
Car: 1990 Camaro IROC-Z28
Engine: 5.7L 350cid
Transmission: auto
Axle/Gears: i think 3.42

Classifieds Rating: (0)
Re: injectors proms and knock

Quote:
Originally Posted by 87SnowFlake View Post
i know this an old post but i just did a swap from a LB9 305 TPI to a 350 tpi. It is spark knocking in higher RPMS (not getting enough fuel). I am using the stock 305 injectors. my friend just got a replacement set for a stock 305 from southbay and he recommended southbay for my injectors. My question is, what injectors do i get from southbay? To me it seems like they have a few sets for a 350 tpi.


dude call them there so dam nice and grade priced belve it or not there baced in the town rite next to me there relible and couldnt be more help full just call they know waht there talking about i also just got the bosh III something or others lol sorry forgot the name.

maybe soem one can help me as well i need to know were to get a stock prom for my car i need a stock 90-92 350 auto no one sales it expet tpi parts for 4oo bucks any one know were i can get one or look for one befor i resort to buying the 400 dollar one

thank you =)
ngonnelly is offline vBGarage Page   Reply With Quote
Old 07-18-2009, 10:40 PM   #7
Sponsor
 
Join Date: Nov 2008
Posts: 255

Classifieds Rating: (0)
Re: injectors proms and knock

Quote:
Originally Posted by 87SnowFlake View Post
i know this an old post but i just did a swap from a LB9 305 TPI to a 350 tpi. It is spark knocking in higher RPMS (not getting enough fuel). I am using the stock 305 injectors. my friend just got a replacement set for a stock 305 from southbay and he recommended southbay for my injectors. My question is, what injectors do i get from southbay? To me it seems like they have a few sets for a 350 tpi.
If you are looking for injectors for your 350 we definitely recommend the 22lb bosch design lll's...we have plenty of them in stock! If you have any questions contact us by:
PM
info@southbayfuelinjectors.com
516492-6504
southbay08 is online now vBGarage Page   Reply With Quote
Old 07-19-2009, 02:51 PM   #8
Junior Member
 
Join Date: Nov 2004
Location: south dakota
Posts: 29
Car: 1991 z28
Engine: 5.7 tpi
Transmission: th700r4
Axle/Gears: 3.23

Classifieds Rating: (0)
Re: injectors proms and knock

I got the 22lbs. design III's, very happy with them. Part number 280155700, all necessary instructions and o rings included. Randy
randyz91 is offline vBGarage Page   Reply With Quote


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > TPI

Tags
280155700, 350, 90, camaro, coming, gen, injector, injectors, iroc, knock, knocking, replacing, spark, stock, swap, tpi
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 






1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 03:03 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
All content copyright © 1997 - 2010 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.