my27kgame

I have a loose vacuum hose and the diagrams tell me it has to go to the HVAC. Does this mean it goes to the AC pump or to the firewall. Instructions would be greatly appriciated.

Twin_Turbo

iTrader: (25)

Depends, is it the long one going to the heater valve? The only other one would be the vac soruce to the heater/ac controls (or am I missing one??). Do you have a pic?

John 89 Formula

If it comes off a "t" fitting on the back of the plenum it goes to the hvac which goes through the firewall. The line may be hard to find as it is wrapped in a bundle that is behind the motor (or at least it was in my '89). I had to cut the tape away to find the line.

Also, my 86 had a box on the firewall above the wiper motor with a vac line attached to it, that could be it also.

my27kgame

here is the picture thanks for the help

John 89 Formula

that goes on a nipple on the box above the brake booster

I've traced it in red in this pic of my 86 Z

Twin_Turbo

iTrader: (25)

Hey, one of those mail box shaped vacuum canisters, I didn't even know 86 and earlier had those. Mine (87 and later) all have the round ball behind the fender.