Mr. Notorious

iTrader: (1)

Can anyone tell me the dimensions on the hardware for the SLP runners? I bought a used set that didn't come with the bolts and I don't even have the factory hardware to get the thread diameter and pitch from. They want $36 for replacement set, but it's only what, 18 bolts? If anyone can help it'd be greatly appreciated...

Mr. Notorious

iTrader: (1)

bump?

Guest

The length you can measure yourself from the runners. Measure where the bolt goes through, and add 1/2". Adjust to nearest larger size, the holes are all at least 3/4" deep in the base. You need at least 5/16" into the base and plenum, including the gasket and given that its aluminum dont use bolts that are too short. The factory thread is 8mmx1.25.

Mr. Notorious

iTrader: (1)

Much appreciated. I didn't have any labeled metric bolts to determining what the base what tapped to

norcalz28

iTrader: (13)

You can get a nice set of stainless or polished bolts on ebay, got mine there because the SLP hardware rusted in a matter of days

Mr. Notorious

iTrader: (1)

Good point. I did check, I think it was TPIS website, and they wanted like $38 with shipping for the 12 bolts or whatever it was. $3 a bolt!

F-Body Demon

iTrader: (1)

Yeah I just bought a set of bolts from my local hardware store for my SLPs. Bolt is a bolt if you ask me. Im not building the Mona Lisa of GTAs.