TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Oil All Over Distributor & Hood

Thread Tools
 
Search this Thread
 
Old 02-12-2012, 06:21 PM
  #1  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Oil All Over Distributor & Hood

I've Been Finding Oil All Over & Underneath My Distributor & Plenum On My 5.7 TPI And There's Oil All Under The Hood Around That Area Too So I'm Guessing It's An Oil Leak Under Pressure? I've Wiped Everything Down Then Checked To See Where It Might Be Coming From After Driving It Around A Little Bit But I Still Can't Determine Where It Is, Does This Problem Sound Familiar To Anyone?
Old 02-12-2012, 06:38 PM
  #2  
Supreme Member

iTrader: (25)
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 5,357
Received 42 Likes on 33 Posts
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Oil All Over Distributor & Hood

oil pressure switch, dr side next to the dizzy. Either the switch is leaking or the plastic elbow broke.
Old 02-12-2012, 06:48 PM
  #3  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

The pressure switch by the oil filter? i just replaced it a few months ago so i never checked but maybe it broke again. That would be crazy how the oil got underneath the distributor and all in that area though, i'll go check that right now & reply, thanks!
Old 02-12-2012, 06:59 PM
  #4  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

There's a little bit of oil on the switch but it looks like it's been there awhile, i wiped it down and i'll keep checking it after i drive it every time to see what happens, thanks for the info. Is there anywhere else i can Also check to start troubleshooting?
Old 02-12-2012, 08:07 PM
  #5  
Supreme Member

iTrader: (13)
 
vetteoz's Avatar
 
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes on 11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Oil All Over Distributor & Hood

Originally Posted by Twin_Turbo
oil pressure switch, dr side next to the dizzy. Either the switch is leaking or the plastic elbow broke.

From whatever fittings /sensors you have in rear oil gallery ( under dist )
Not uncommon for the OP switches to leak under pressure when old

LT1 shown


Old 02-12-2012, 11:05 PM
  #6  
Member

 
spurgeon76's Avatar
 
Join Date: Sep 2005
Location: Yorktown, VA
Posts: 389
Received 3 Likes on 2 Posts
Car: 1989 IROC-Z
Engine: L98
Transmission: 700R4
Axle/Gears: 4th gen rear with 3.42
Re: Oil All Over Distributor & Hood

There is a circle gasket under the Distributor, if it went bad it would allow oil to shoot out while running. Mine went bad and covered the firewall with oil.
Old 02-13-2012, 04:43 PM
  #7  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

Yeah the distributor was replaced 3 years ago along with the ring but i'm thinking it could be that. I will probably change it anyway just in case and if it isn't that at least it wont be a problem in the near future.
Old 02-14-2012, 06:01 AM
  #8  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

The Oil Leak Just Got A Lot Worse I Wiped My Engine Down Clean & I Drove 20 Miles To Fullerton & There Was A Mess Of Oil All Around The Back Of The Intake, Under The Runners And Around The Distributor. I Added Another Quart At The Gas Station And All The Way Home My Oil Pressure Was Dropping & Going Up, It Dropped Into The Red A Few Times. I Got Home & Popped The Hood While The Car Was Still Running & It Was A Big Mess, I Pulled The Throttle Lightly & There Appeared To Be Oil Sprinkling Straight Up Somewhere Next To The Distributor On The Right Hand/Drivers Side. Any Ideas? I'm Hoping To Get This Problem Fixed Today Since This Is My Daily So If Anyone Has Anymore Ideas I Would Really Appreciate It, Thanks.
Old 02-14-2012, 07:04 AM
  #9  
Supreme Member

iTrader: (25)
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 5,357
Received 42 Likes on 33 Posts
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Oil All Over Distributor & Hood

See the pic above, the sensors there are the most likely culprit, the crimps on the pressure senders fail often and will result in oil shooting out under pressure
Old 02-14-2012, 02:33 PM
  #10  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

Originally Posted by Twin_Turbo
See the pic above, the sensors there are the most likely culprit, the crimps on the pressure senders fail often and will result in oil shooting out under pressure

Are Those Located In The Back Of The Engine?
Old 02-14-2012, 02:52 PM
  #11  
Supreme Member

iTrader: (25)
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 5,357
Received 42 Likes on 33 Posts
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Oil All Over Distributor & Hood

Yes, what you see is next to distributor. Although the pic is a vette setup with 2 sensors (one is a pressure switch, the other is for the gauges) yours will have a single elbow and 1 sending unit. I've had the narrow ones like in the pic aove fail on 2 cars and the oil would come ouf of the electrical connector. The larger early ones tend to leak at the crimp.
Old 02-17-2012, 06:26 PM
  #12  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

Originally Posted by Twin_Turbo
Yes, what you see is next to distributor. Although the pic is a vette setup with 2 sensors (one is a pressure switch, the other is for the gauges) yours will have a single elbow and 1 sending unit. I've had the narrow ones like in the pic aove fail on 2 cars and the oil would come ouf of the electrical connector. The larger early ones tend to leak at the crimp.
Oh Ok I See, I Changed he Distributor Ring This Morning And It's Still Misting Oil, It Mists While The Throttle Is Being Pulled & Mists Constantly Until The Throttle Is Released, I Was Looking For That Sensor You're Talking About After I Pulled Out The Distributor But I Didn't Find It. There's Not A Picture For An L98 Block? Also Is There Anything That Carrys Oil Through It Underneath The Plenum? Thanks For Your Help I Really Appreciate It
Old 02-17-2012, 06:45 PM
  #13  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

This Is A Picture Underneath The Plenum Looking In From The Driver's Side, Does That Have Anything To Do With Oil??



Name:  Ily02171635_2-Copy.jpg
Views: 93
Size:  157.6 KB
Old 02-17-2012, 06:46 PM
  #14  
Supreme Member

iTrader: (25)
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 5,357
Received 42 Likes on 33 Posts
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Oil All Over Distributor & Hood

no, that's the intake air temp sensor, no oil there or under the plenum. ONly the oil press switch in the rear china wall of the block.

Last edited by Twin_Turbo; 02-18-2012 at 01:25 PM.
Old 02-17-2012, 06:58 PM
  #15  
Member
Thread Starter
 
KingsHustleLA's Avatar
 
Join Date: Mar 2010
Location: charlotte
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Camaro
Transmission: T5
Axle/Gears: 411
Re: Oil All Over Distributor & Hood

Alright So That Has Nothing To Do With My Problem Then. So Where Would That Oil Pressure Switch Be On The Passenger Or Driver's Side Of The Distributor?
Old 02-17-2012, 07:20 PM
  #16  
Supreme Member

iTrader: (25)
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 5,357
Received 42 Likes on 33 Posts
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Oil All Over Distributor & Hood

drivers side
Old 02-17-2012, 09:11 PM
  #17  
Supreme Member

iTrader: (13)
 
vetteoz's Avatar
 
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes on 11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Oil All Over Distributor & Hood

Originally Posted by KingsHustleLA
So Where Would That Oil Pressure Switch
Only one place for it ,
As shown in the pic I 1st put up ; in the oil gallery at rear of block
What it looks like is a different story , could have one or two sensors there / large like shown or smaller


Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
mddaniel
Tech / General Engine
12
09-08-2015 05:16 PM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
4
08-21-2015 09:32 AM
355sbcTPI
Electronics
2
08-19-2015 04:38 PM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM



Quick Reply: Oil All Over Distributor & Hood



All times are GMT -5. The time now is 01:30 PM.