What Goes Here?
#1
What Goes Here?
OK, so I'm getting close to firing up the 383, I just have one more port to fill. What goes in the 1/8" NPT port at the rear of the lower intake? No wire connector nearby (the one in the pic is for the distributor), the intake is Edelbrock, the car is a 92 LB9 Formula.
Also, what would that blockoff plate be there for? EGR blockoff is in the center of the intake.
Also, what would that blockoff plate be there for? EGR blockoff is in the center of the intake.
#2
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,732
Received 787 Likes
on
528 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: What Goes Here?
The lil 1/8npt pipe hole is a coolant tap, the block off plate is for a EGR feed tube. Both of these are used on a corvette TPI. You will not use them on a F-body.
If you bought it new, it should all be in your instructions.
If you bought it new, it should all be in your instructions.