EGR
04-06-2015, 09:49 AM
#1
Member
Thread Starter
Join Date: Feb 2003
Location: Wasco, CA
Posts: 262
Likes: 0
Received 1 Like
on
1 Post
Car: Camaro
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Borg Warner/ 2.77
EGR
What's up! I got a code 32 the other day, and I decided to take off my EGR to clean it out to see if it would function. Got it all back together, checked if the valve actuated and it did, but I put it all together and it still wouldn't work. I contacted napa and got one ordered but the port where the temp switch is located Is too small. Does anyone know where I can find the correct one or can I use the one from a 305? Or can it be the temp switch itself? I hate running my car in limp mode. HELP!
04-06-2015, 09:55 AM
#2
Member
Thread Starter
Join Date: Feb 2003
Location: Wasco, CA
Posts: 262
Likes: 0
Received 1 Like
on
1 Post
Car: Camaro
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Borg Warner/ 2.77
Re: EGR
Also, napa offers a EGR with a bigger temp switch port hole but its only for a 305. Also whats the original EGR part # for a 88 350. Can I use one from a 89? And I managed to find one on ebay. http://www.ebay.com/itm/330829560007...84.m1436.l2649
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM