Do the T5 and TH350 use the same yoke?
08-28-2004, 11:02 AM
#1
Member
Thread Starter
Join Date: Jan 2003
Location: Hartland MI
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 355
Transmission: 700r4
Axle/Gears: 3.73
Do the T5 and TH350 use the same yoke?
Someone had told me a T5 and PG use the same yoke and I see a moser take apart yoke listed as PG/TH350 and was looking to use a vette TH350 take apart yoke for a T5 swap into my 73 vette. BTW Vettes require the drive shaft to be dropped from the trans end or you have to pull the eng to do it.
08-28-2004, 01:06 PM
#3
Member
Thread Starter
Join Date: Jan 2003
Location: Hartland MI
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 355
Transmission: 700r4
Axle/Gears: 3.73
Originally posted by DSmith
I pulled a T5 out of a 84 Z28 and installed a TH350 and used the same yoke.
I pulled a T5 out of a 84 Z28 and installed a TH350 and used the same yoke.
Excellent, thanks for the info!
Thread
Thread Starter
Forum
Replies
Last Post
