84RIceEater

I am Building a 350 around 320-310 Hp.. W/ a 100Shot of Nos. to make it 420-410Hp. Will The Stock 700R4 Handle it w/ just a Tranny Cooler, corvette Servo,TransGo or B&M Shift kit, and a Sizzler TC. Am i more Worryed about the tranny Holding up to the TQ or HP?
They tranny has been rebuilt accoreding to the last Owner but i have no idea if he was blowing smoke up my A$$.

Here is the Tc if it helps anyBit.

http://www.jegs.com/webapp/wcs/store...0555&langId=-1


I did a Search and these were the most useful threads, that ALMOST answer my question.. Maybe u have found somthing better plz Post it Thanks.


1.) https://www.thirdgen.org/techbb2/sho...a+700r4+handle


2.) https://www.thirdgen.org/techbb2/sho...a+700r4+handle


Thanks aGian i know it seems to be the same ol Question i just dont want the same ol answer.lol.


PEace. Marcel.

dankhound

Torque is the method used for rating trannys. One of the things thats gonna decide wheter it will hold is traction. If the car hooks and your launching with nitrous you may have some issues. Otherwise i wouldnt worry about it too much.

84RIceEater

well i would only wanna use it in 4th... because it seems like my 1st gear always wants to over-rev. and i think the nitrous will for sure kill it.

84z28350

Try adjusting the TV cable to get the shift down, but only follow proper procedure if its set wrong youll burn your tranny up that way too.

84RIceEater

aww.. i rather put my engine in b4 all that and i am going to let the trany shop put the transpro kit in and i'll tell them to check it out.. i am not trying to burn anything.