Slave Cylinder bracket heat shield
#1
Member
Thread Starter
Join Date: Jan 2005
Location: Queens NY
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Z28
Engine: 350 sbc goodwrench
Transmission: T-5 in the works
Axle/Gears: 10 bolt 3.42 open
Slave Cylinder bracket heat shield
The search feature brought nothing up so
Ill give this a shot.
I need the slave cylinder bracket or heat shield with bolts.
Gm part number would be great.
It seems that Gm discontinued the bracket for the clutch resevoir,
to bad for that.
In my view a company that sells the same car for 10 years shouldnt discontinue parts.
The last time I went to the dealer they said that after 10 years
they dont have to stock parts for the car anymore.
Since the car was in production for 10 years
Gm should take another look at there policy..that is ridiculous.
For now I have the Part number for the u-bolt for the clutch master cylinder dont know if it comes with nuts probably not..
I will post Gm part numbers for all the little stuff
for this swap thats still available..eventually
Ill give this a shot.
I need the slave cylinder bracket or heat shield with bolts.
Gm part number would be great.
It seems that Gm discontinued the bracket for the clutch resevoir,
to bad for that.
In my view a company that sells the same car for 10 years shouldnt discontinue parts.
The last time I went to the dealer they said that after 10 years
they dont have to stock parts for the car anymore.
Since the car was in production for 10 years
Gm should take another look at there policy..that is ridiculous.
For now I have the Part number for the u-bolt for the clutch master cylinder dont know if it comes with nuts probably not..
I will post Gm part numbers for all the little stuff
for this swap thats still available..eventually
#2
Supreme Member
iTrader: (9)
it costs alot to store parts that don't move and thus cost more money sitting taking up space.
why should gm care they sell new cars not old used cars.
but, you maybe in luck as the dealer can call the company that buys gm's old parts "vintage" right here in beaver dam WI . they sell parts pretty cheap too. I think they are cheaper than gm sold them when they were current parts.
the sheild for the slave is.. 14075712
the bolts...... just go to the hard ware store and match them up 12mm I think by 1 1/2" long
why should gm care they sell new cars not old used cars.
but, you maybe in luck as the dealer can call the company that buys gm's old parts "vintage" right here in beaver dam WI . they sell parts pretty cheap too. I think they are cheaper than gm sold them when they were current parts.
the sheild for the slave is.. 14075712
the bolts...... just go to the hard ware store and match them up 12mm I think by 1 1/2" long
Thread
Thread Starter
Forum
Replies
Last Post