NEED HELP...rear end paddle question
03-13-2007, 06:12 PM
#1
Supreme Member
Thread Starter
Join Date: Nov 1999
Location: Charlotte, NC
Posts: 1,069
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: GMPP 350 HO w/TBI
Transmission: 700R-4
Axle/Gears: 10-bolt w/3.73s
NEED HELP...rear end paddle question
I rebuilt my 10-bolt with a take-off differential from SLP. The take-offs were taken off of the Z28s and Trans Ams/Formulas, so it's basically just a "stock" 4th gen differential.
My question is how the "paddle" shoudl be installed into the differential. Please see the following pictures:
In this one, the "notch" is towards the top of the rear end...
And, in this one, the "notch" is towards the bottom of the rear end.
Anyone know which is right? I've gotten plenty of "I think..." or "maybe...", so if you happen to have a definite answer, please let me know!
Thanks a lot for the help,
-Brian
My question is how the "paddle" shoudl be installed into the differential. Please see the following pictures:
In this one, the "notch" is towards the top of the rear end...
And, in this one, the "notch" is towards the bottom of the rear end.
Anyone know which is right? I've gotten plenty of "I think..." or "maybe...", so if you happen to have a definite answer, please let me know!
Thanks a lot for the help,
-Brian
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
12-11-2023 08:14 AM
