B&M SHift Improver Kit
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: Topeka, KS
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Iroc Camaro
Engine: 5.7 350 TPI
Transmission: 700R4 Automatic
Axle/Gears: 2.73
B&M SHift Improver Kit
Well, I decided to go ahead any try the B&M kit just for giggles. I put it on heavy duty mode, with some different spacers and a stiffer spring in the 1-2 accumulator. I am happy to say that now 150 miles later, the car shifts ever strong and firm. I was expecting to have much harder shifts, but they are actually faster and only slightly harder, although you can feel them much more. After reading some threads on here, I did not install the line bias blocker either, as to spare myself a new tranny. I know that most people on here are Transgo fans, but I was just letting people that B&M ain't all that bad, espcially for the price. Also, I filled the tranny with some regular tranny fluid, and 1 quart of Hurst Hot Shift Full Synthetic.
#2
Supreme Member
iTrader: (1)
Join Date: Aug 2004
Location: colorado
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
Re: B&M SHift Improver Kit
Just had it done myself, and so far the shifts have been firm, but not neck snapping. All in all its just an improver kit, and guess what??? My Haynes Transmission overhaul book recomends that exact same kit.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM