T56 swap using T5 bellhousing
10-13-2007, 03:16 PM
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
T56 swap using T5 bellhousing
A while back i saw a website that offered a T-56 tranny that bolted up to the T-5 bellhousing and used the T-5 clutch stuff...
im having trouble finding it.. anyone know what im talking about
im having trouble finding it.. anyone know what im talking about
10-14-2007, 10:06 PM
#3
Member
Join Date: Apr 2000
Location: FLA (US) & PTY
Posts: 203
Received 0 Likes
on
0 Posts
Car: Z-28
Engine: 355
Transmission: T-56
Axle/Gears: Stock
Re: T56 swap using T5 bellhousing
Hi,
I have this transmission, the one outlined on the link. It is a charm, I had o purchase and SPD crossmember and on top of that, had to put about a 1 inch spacer between the crossmember and the chassis. See, the t-56 it way bigger and heavier.
One thing that happened was that the stickshift center with trans housing hole, but just by 2 inch offset.
I love this trans.
I have this transmission, the one outlined on the link. It is a charm, I had o purchase and SPD crossmember and on top of that, had to put about a 1 inch spacer between the crossmember and the chassis. See, the t-56 it way bigger and heavier.
One thing that happened was that the stickshift center with trans housing hole, but just by 2 inch offset.
I love this trans.
Thread
Thread Starter
Forum
Replies
Last Post
50, adapter, bell, bellhousing, bellhousings, bellohousing, gen, housing, same, swap, t5, t56, trans, transmission, work
