T56 yoke clearance?
#1
Supreme Member
Thread Starter
Join Date: May 2000
Posts: 2,963
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1982 Z28
Engine: LS1
Transmission: T56
T56 yoke clearance?
I finished installing my T56 over the weekend, but am concerned about the clearance between my driveshaft yoke and the rubber dust boot that extends ~1" rearward of the tailshaft housing.
I only have 2mm of clearance with the suspension at normal resting load. It looks like the yoke will come into contact with the rubber dust boot during suspension travel.
What's considered normal clearance on this? I can have my driveshaft shortened if necessary...but I don't want to give up spline overlap on the tailshaft if not needed.
------------------
1982 Z-28
See http://www.mycar.net/mafb/registry/detail.cfm?id=276 for details
I only have 2mm of clearance with the suspension at normal resting load. It looks like the yoke will come into contact with the rubber dust boot during suspension travel.
What's considered normal clearance on this? I can have my driveshaft shortened if necessary...but I don't want to give up spline overlap on the tailshaft if not needed.
------------------
1982 Z-28
See http://www.mycar.net/mafb/registry/detail.cfm?id=276 for details
Thread
Thread Starter
Forum
Replies
Last Post