What stall speed w/ this engine combo (info w/in)
#1
Member
Thread Starter
Join Date: Dec 1999
Location: Cincinnati, Ohio 45215
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
What stall speed w/ this engine combo (info w/in)
I have an L98, with a zz4 cam and performer rpm manifold, holley 750 carb, and may be adding a 150 shot of nitrous (forged pistons) before it's all said and done, what would be the best stall speed for street/strip (more strip)
#3
Member
Thread Starter
Join Date: Dec 1999
Location: Cincinnati, Ohio 45215
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
oh yeah, sorry!
Gear: 3.27
ZZ4 Cam:
Hydraulic roller tappet
duratation @ .050 cam lift I:208 E:221
gross valve lift(1.5 ratio) I:474" E:510"
lash Zero/Zero
lobe centerline 112 degrees
Gear: 3.27
ZZ4 Cam:
Hydraulic roller tappet
duratation @ .050 cam lift I:208 E:221
gross valve lift(1.5 ratio) I:474" E:510"
lash Zero/Zero
lobe centerline 112 degrees
#4
Supreme Member
iTrader: (3)
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!
i would say either 2500 or 3000 would be fine with your setup. just me opinoin though.
------------------
91 camaro RS
- 305 TBI
Mods: Performer TBI intake, 1" TBI spacer, K+N, jet fan switch ,160 thermo,Accel control module, Jet Stage 2 chip, edelbrock TES headers, Compleate 3" Flowmaster exhaust, Edelbrock springs, KYB struts and shocks, 700R4 built by TSI, SLP tq converter, b+m trans cooler, white guage faces, megashifter..
next month: spohn LCA's and panhard rod, BMR relocation brackets, 323 gear, lt1 cam , 350 heads
------------------
91 camaro RS
- 305 TBI
Mods: Performer TBI intake, 1" TBI spacer, K+N, jet fan switch ,160 thermo,Accel control module, Jet Stage 2 chip, edelbrock TES headers, Compleate 3" Flowmaster exhaust, Edelbrock springs, KYB struts and shocks, 700R4 built by TSI, SLP tq converter, b+m trans cooler, white guage faces, megashifter..
next month: spohn LCA's and panhard rod, BMR relocation brackets, 323 gear, lt1 cam , 350 heads
Thread
Thread Starter
Forum
Replies
Last Post
3rdgenparts
Engine/Drivetrain/Suspension Parts for Sale
6
05-21-2016 11:50 PM