Stuck TV valve
#1
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Benzie, MI
Posts: 1,665
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Stuck TV valve
1988 700r4
I'm having downshifting issues and erratic shift firmness so I'm replacing the tv plunger. I have the sleeve and spring out, but the plunger is stuck and doesn't have any springiness to it. There are supposed to be two springs behind it and it is solid and not moving. Im going to look for a small enough magnet to get in there tomorrow and if that fails I suppose I will have to take off the valve body.....
Any tips before I have to do that?
I'm having downshifting issues and erratic shift firmness so I'm replacing the tv plunger. I have the sleeve and spring out, but the plunger is stuck and doesn't have any springiness to it. There are supposed to be two springs behind it and it is solid and not moving. Im going to look for a small enough magnet to get in there tomorrow and if that fails I suppose I will have to take off the valve body.....
Any tips before I have to do that?
Last edited by Batass; 04-05-2010 at 02:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
355tpipickup
Tech / General Engine
9
09-13-2015 11:35 PM