700R4 Shift kit
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Denver, CO
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 350TPI
Transmission: 700R4 lookin for shift kit
Axle/Gears: 3.23???
700R4 Shift kit
I want a good shift kit, to shift kind of hard and powerful. and wen i burn out in 1st gear to stay there. I saw a few threads and people metioned Transgo Performance shift kit, but will that give me the hard and powerful shift i want? I have a 400sbc... it has mayb 350hp
#2
Senior Member
Join Date: Sep 2007
Location: Leander,TX
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 84 Z28 / 88 Trans Am / 87 base
Engine: L69 H.O. / 468 BBC / 2.8 v6
Transmission: 89 700R4 / TH375B / 700R4
Axle/Gears: 3.73 open / 3.23 posi / 3.42 open
Re: 700R4 Shift kit
The transgo kit is pretty much the best on the market. You do not want a hard shift with these transmissions only a firm shift. A hard shift will break internal parts always. My transgo kit gave me an impressive kick feeling without truly snapping my neck. also my strip times improved over the harsh TCI kit I had before in the original 84 model 700.
#3
Moderator
Re: 700R4 Shift kit
https://www.700r4l60e.com/store/home.php?cat=65
Here's my car with a TransGO from Probuilt. First part is the shift kit with bolt ons on the L98. Second part is after H/C/I and 3.73's.
http://www.youtube.com/watch?v=h8gC9ROGi9c
Here's my car with a TransGO from Probuilt. First part is the shift kit with bolt ons on the L98. Second part is after H/C/I and 3.73's.
http://www.youtube.com/watch?v=h8gC9ROGi9c
Last edited by IROCThe5.7L; 07-02-2010 at 07:33 AM.
#4
Senior Member
Join Date: Jun 2009
Location: Evansville, IN
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z28
Engine: Forged 355
Transmission: 700r4
Axle/Gears: 2.73
Re: 700R4 Shift kit
https://www.700r4l60e.com/store/home.php?cat=65
Here's my car with a TransGO from Probuilt. First part is the shift kit with bolt ons on the L98. Second part is after H/C/I and 3.73's.
http://www.youtube.com/watch?v=h8gC9ROGi9c
Here's my car with a TransGO from Probuilt. First part is the shift kit with bolt ons on the L98. Second part is after H/C/I and 3.73's.
http://www.youtube.com/watch?v=h8gC9ROGi9c
#5
Junior Member
Join Date: Jan 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro rs
Engine: 5.0 TBI (LO3)
Transmission: 700R4
Axle/Gears: stock
Re: 700R4 Shift kit
hey i have a transgo on mine and i have all the firm tweeks on it but when i gun it first to second shift is long/soft but i did what it said to make it firm. do u have any ideas whats wrong
#7
Junior Member
iTrader: (2)
Join Date: Nov 2007
Location: ottawa Ontario
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 z28
Engine: 5.7l TPI
Transmission: 700r4
Axle/Gears: 3.73
Re: 700R4 Shift kit
https://www.700r4l60e.com/store/home.php?cat=65
Here's my car with a TransGO from Probuilt. First part is the shift kit with bolt ons on the L98. Second part is after H/C/I and 3.73's.
http://www.youtube.com/watch?v=h8gC9ROGi9c
Here's my car with a TransGO from Probuilt. First part is the shift kit with bolt ons on the L98. Second part is after H/C/I and 3.73's.
http://www.youtube.com/watch?v=h8gC9ROGi9c
i am looking at a transgo kit but bit to sure what one i should get
i have a 1991 z29 with the l98
i just had the tranny re done, the place that did it told me that there is a shift kit in it now but i still dont like the way 2-3 shifts so i got a new valve body and now i just need a kit to put it all in
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
tonys91rs
Engine/Drivetrain/Suspension Parts for Sale
3
10-10-2015 03:31 PM
TheTraut88
Engine/Drivetrain/Suspension Parts for Sale
1
09-07-2015 05:22 PM
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM