4th gen carrier in 3rd gen
12-03-2012, 02:20 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z28
Engine: 350ci
Transmission: Th350
Axle/Gears: 3.73
4th gen carrier in 3rd gen
Will it fit? I have 1992 z28 I read somewhere that the carrier out of fourth gen US spec (ring and pinion along with the torsen ) will fit a US spec 3rd gen rearend both share 28 spline shafts Im having problem with the stock posi and 3.73 want to go with stock 3.23 but better carrier
12-03-2012, 06:55 AM
#2
Supreme Member
Join Date: Sep 2008
Posts: 3,777
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4th gen carrier in 3rd gen
All of the LT1 cars had the same Auburn differential that you have now. The LS1 cars got the Torsen, and yes, it will fit. You still must set the pinion depth, bearing preload and backlash when changing gears.
12-06-2012, 07:00 PM
#4
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z28
Engine: 350ci
Transmission: Th350
Axle/Gears: 3.73
Re: 4th gen carrier in 3rd gen
I have found two rear ends one with 3.23 and the other 3.42 will get them both
Thread
Thread Starter
Forum
Replies
Last Post
