Photo or part number for a clutch pedal switch
#1
Member
Thread Starter
Join Date: Jun 2010
Location: Holly Springs NC
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 iroc
Engine: 350 30 over
Transmission: T5
Axle/Gears: Series 2 373
Photo or part number for a clutch pedal switch
I having a hard time try to find the right clutch pedal safety switch for my t5 swap the pedals did not come with any of the switches for the pedal
Any help would be helpful
Thanks in advanced
Any help would be helpful
Thanks in advanced
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,051
Received 1,672 Likes
on
1,269 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Photo or part number for a clutch pedal switch
I can't give you a pic, because mine failed about 15 yrs ago; but I'll give you a description.
Its body had one of those plastic barb features, and poked into a hole in the bracket, leaving it free to rotate. Then it had a long rod that went all the way through it, with a similar plastic barb that poked into the pedal at one end, and a head like a nail at the other. The rod could just slide freely through the middle of the switch slider. When it reached the end of its travel as the pedal reached the floor, the "head" would catch the spring-loaded guts of the switch and operate it.
Mine, the barb that poked into the pedal wore through.
Its body had one of those plastic barb features, and poked into a hole in the bracket, leaving it free to rotate. Then it had a long rod that went all the way through it, with a similar plastic barb that poked into the pedal at one end, and a head like a nail at the other. The rod could just slide freely through the middle of the switch slider. When it reached the end of its travel as the pedal reached the floor, the "head" would catch the spring-loaded guts of the switch and operate it.
Mine, the barb that poked into the pedal wore through.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM