Flywheel Runout
#1
Member
Thread Starter
Join Date: Jan 2001
Location: Hotter'n Heck, Ar
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
Flywheel Runout
I indicated my flywheel to find it has about .006" runout. Is this too much? I read somewhere about .010" being the magic high number but I am not certain.
I had the flywheel turned about 5K miles ago and now the clutch chatters a bit and I need to narrow things down.
Thanks
Dale
I had the flywheel turned about 5K miles ago and now the clutch chatters a bit and I need to narrow things down.
Thanks
Dale
#2
TGO Supporter
i was thinking .005 but i'd have to look or ask someone. no more than it cost i'd have it resurfaced, if you already have the trans out, if the trans is in i'd leave it i think,.
Thread
Thread Starter
Forum
Replies
Last Post
monte87cortez
Transmissions and Drivetrain
2
09-26-2015 08:10 PM
el_muerte
Engine/Drivetrain/Suspension Wanted
0
09-16-2015 12:01 AM