Back of heads and charcoal canister
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Reading, PA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Camaro RS
Engine: 3.1L
Back of heads and charcoal canister
First, I can't remember what's suppose to bolt to the back of the heads in those four spots...and also on the one bolt there that needs a nut on the end....If anyone would be willing to go out and look at their 3.1L and tell me what they find (or even a picture), that'd be most kind of you.
...and what's the purpose of the big tube? All it does on my car is go out about 18" and then branches off into a T and extends 3" in one direction and 6" in the other...and it's not hooked up to anything...just a vent, I hope?
#2
Senior Member
iTrader: (5)
Join Date: Nov 2006
Location: Tallahassee, FL
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 V6 Camaro
Engine: 2.8
Transmission: 700R4
Axle/Gears: 3.42 open diff
Re: Back of heads and charcoal canister
You don't even need the charcoal cannister. Just put a breather on the hard line and call it a day. I took mine out a while ago and everything is fine as far as that is concerned.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
Mister_Johnny99
Interior Parts Wanted
0
08-14-2015 12:59 PM