blackstripes

i have seen posts for for making a home-made air intake system out of a home dryer tube from some place like home depot. i was wondering if anyone could give me further instruction on how to do this and if someone has done it, what the results were like. thanks.

------------------
92 Rallysport V6 Red with black stripes.

steven

i just did the ram air system, the one you are refering to, were you run tubing down the fender wall and bolt it to the bottom of the car open towards the front, and air is forced in, it helps alot, keeps the car running coolier and it takes off faster. i just went to the local parts shop and bought a air intake tube, and put it on over the old plastic pipe that comes out of the old metal air box. it fit perfectly, slug and tight, then i ran it down down the fender wall and throught one of the openings(supports) the the bottom of the bumper, then unscrew one of the bumper cover screws and rescrewed it in with the pipe attacted to it facing forward. make sure the pipe is tight and has no kinks in it, you are going to have to unscrew the little black tube that sits right next to the air box, it is alittle in the way, i just unscrewed one side of it and the other side was still screwed on so i just rotated it around, and it fits perfect. i know its kind of hard to understand, but i will have pictures up soon, so you can see it. hope that helped.

------------------[*]191(3.1)V6 1992 Pontiac Firebird[*]K&N filter with no air box(open air)[*]bosch patinum spark plugs[*]Flowmaster Exhaust w/ 3" tips[*]Pioneer reciver[*]kenwood 4x6's[*]sony xplod 6x9's[*]1 kenwood 12" powered by a 300 watt jenson amp[*]much more engine and stereo mods to come!!!...., when i get some damn money. www.geocities.com/my_92firebird

steven

http://www.geocities.com/MotorCity/S...49/ramair.html here it is, i just don't have the little scoop for the bumper yet

------------------[*]191(3.1)V6 1992 Pontiac Firebird[*]K&N filter with no air box(open air)[*]bosch patinum spark plugs[*]Flowmaster Exhaust w/ 3" tips[*]Pioneer reciver[*]kenwood 4x6's[*]sony xplod 6x9's[*]1 kenwood 12" powered by a 300 watt jenson amp[*]much more engine and stereo mods to come!!!...., when i get some damn money. www.geocities.com/my_92firebird

89V6FBIRD

i know this is a lil off the subject, but how do the ppl w/ a MAF sensor setup do this?

------------------
Stock 2.8 MPFI auto w/ Flowmaster 40, More to come......
New Pioneer Head Unit
Targa E-910 7-Band Equalizer w/ crossover
2x 10" Pioneer subs powered by 300 Watt Jensen amp
2- 6x9" Pioneer (rear)
More to come..... (hey, i dont got a job yet)

FORD Rustangs -R- Us

what about ground effects

Bizzy

I put that dryer hose on my carb'ed 2.8 camaro and it works great. i don't think i have a good seal on it though. it is about an inch bigger than my air cleaner hose. i have it coming out of my bumber next to the lisence plate. my car's suspension is shot so i'm afraid to put it too close to the ground.

Brian K

http://geocities.com/overlift/Dcp02084.jpg

Simple, easy and highly effective...