where to get new TV cable?
#1
Member
Thread Starter
Join Date: Sep 2000
Location: indiana
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
where to get new TV cable?
id like to get a little longer on or gm part #
------------------
1992 camaro RS
195cc AFR heads with compition port work milled to 58cc "10.9 to 1 compression"
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.65 full roller rockers
497-510 LIFT 214-220 duration
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf"no fins no screens"
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
accel 8.8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit edelbrock water pump
new best ET 13.5 @104.66
no times with new afr heads hoping for 12's on motor
Nos to be installed soon
------------------
1992 camaro RS
195cc AFR heads with compition port work milled to 58cc "10.9 to 1 compression"
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.65 full roller rockers
497-510 LIFT 214-220 duration
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf"no fins no screens"
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
accel 8.8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit edelbrock water pump
new best ET 13.5 @104.66
no times with new afr heads hoping for 12's on motor
Nos to be installed soon
#2
Senior Member
Join Date: Jul 1999
Location: Christchurch, New Zealand
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
#3
Supreme Member
iTrader: (1)
Join Date: Dec 2000
Location: Cincinnati,Ohio
Posts: 2,341
Received 151 Likes
on
111 Posts
Car: 1991 BandittII Firebird
Engine: 5.7 HSR
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
call you local chevy dealership
------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt2
<A HREF="http://clubs.yahoo.com/clubs/streetdawgracing" TARGET=_blank>
http://clubs.yahoo.com/clubs/streetdawgracing</A>
http://y42.photos.yahoo.com/tonysams72.
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation
------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt2
<A HREF="http://clubs.yahoo.com/clubs/streetdawgracing" TARGET=_blank>
http://clubs.yahoo.com/clubs/streetdawgracing</A>
http://y42.photos.yahoo.com/tonysams72.
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation
#4
Supreme Member
Join Date: Nov 2000
Location: San Antonio, TX
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Car: Damn
Engine: This
Transmission: New Stuff
I also agree with getting it from a dealership. Or make sure it's ACdelco or GM made. The cheap ones like from autozone and the likes always strech and screw up your shift points. Never had a prob with the GM ones.
Just my experience.
Good luck.
(try a junkyard)
------------------
'88 RS (originally 2.8)
New 350, .040 over, ported vette L98s, ported stock tpi.
Old 305 injectors & chip
TES headers, 3.73 gears, 700r4.
Best with 2.8-17.4@77mph
Best with 305-15.0@93mph
Best with 356-13.7@101mph
(Damn the 2.8!)
Just my experience.
Good luck.
(try a junkyard)
------------------
'88 RS (originally 2.8)
New 350, .040 over, ported vette L98s, ported stock tpi.
Old 305 injectors & chip
TES headers, 3.73 gears, 700r4.
Best with 2.8-17.4@77mph
Best with 305-15.0@93mph
Best with 356-13.7@101mph
(Damn the 2.8!)
#5
Supreme Member
Join Date: Jan 2001
Location: Brockton, MA, USA
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z28
Engine: 6.6L 406
Transmission: T-56
I got one from Autozone and its made by AC Delco. and it only cost about $10-$14
------------------
LONG LIVE THE MUSCLE CAR!!!!! MAY ITS REIGN NEVER END
1983Z28 350w/ edelbrock performer RPM power package with 64cc aluminum heads, dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.
future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.
[This message has been edited by super83Z (edited March 23, 2001).]
------------------
LONG LIVE THE MUSCLE CAR!!!!! MAY ITS REIGN NEVER END
1983Z28 350w/ edelbrock performer RPM power package with 64cc aluminum heads, dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.
future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.
[This message has been edited by super83Z (edited March 23, 2001).]
#6
Member
Join Date: Feb 2001
Location: san antonio tx usa
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84z28
Engine: chevy 388
Transmission: 700r4
i got the one from summit part# LOK-KD-2700TP
its a steal braded one that for me can hande
some heat plus the part that connects to the tranny is
alumuim billet.it works great for me.
check out my simple page at:
http://darcom.home.texas.net/
its a steal braded one that for me can hande
some heat plus the part that connects to the tranny is
alumuim billet.it works great for me.
check out my simple page at:
http://darcom.home.texas.net/
#7
Yeah, that last post is a Lokar and they are nice. but bang for the buck, OEM GM is best, wherever you can get it. I would be surprised if any Autozone sells GM cables. My Autozone doesn't...
Thread
Thread Starter
Forum
Replies
Last Post
Z28/ZR1
Engine/Drivetrain/Suspension Parts for Sale
3
10-23-2015 01:04 PM
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
10-07-2015 12:09 PM