We'd like to thank a lot of you that have shown support here for Summit Racing. We appreciate the many comments that have been posted, and we appreciate your business.

To say "thanks," we're offering a 10% discount to ALL thirdgen.org members through April 20, 2001. The "fine print" is pretty simple:
no minimum order required; the discount is off Summit's regular prices, no other discounts apply; you must call our toll-free number (800) 230-3030 to get this discount; not valid for Internet or retail store orders; not valid for gift certificates or subscriptions; we reserve the right to limit quantities.

**IMPORTANT** You must give the salesperson this thirdgen.org code to get your discount: L52720

I hope I didn't offend anyone with this commercial posting. I cleared this with the web moderator before I posted it.

Thanks again for your business. We truly appreciate it.

Regards,
Jon Hedges
Marketing Manager
Summit Racing

 

Guess that means I'll have to place two orders, one for the discount coupon I have, then one for the Thirdgen discount. You guys are killing my wallet! hehe

------------------
KevinP92Z
92 Z28 383 SLP cam,SLP headers,SLP 2ontheLeft,Trick Flow TW heads & pistons,Edelbrock base,Accel SuperRam,52mmTB,Scat Crank & forged ConnRods,MSD 6AL,SLP convertor,Baer 13/12" Track,Moser axles,Hotchkis,Genuine GM 3.42s,SLP HD Torsen,17x9" chrome SS rims
96T/A w/SLP Ram Air,SLP 2ontheLeft, Bilsteins, Baer, Hotchkis, Genuine GM, Torsen
76 4X4 Blazer 400TPI project

 

I must of ordered up to $3,000 dollars worth of parts and until now never recieved anything from summit. I must of gave so many plugs, suggesting summit to others and buying from them myself what do i get 10% off. Im gonna save alot of money now

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

Thanks Summit.

ps...wish i'd have waited on ordering my gtech. ordered it last week.

 

Thanks Summit, guess this is as good a time as any to order up my new crank, forged pistons, and rods. Now if I could only talk you into a layaway plan for that Dart SBC block that can be bored and stroked to 455 CI.

 

Thank you Summit . I rest my case, they are better than jegs

 

Woah. Just when you think you're already holding a company in high esteem, they go and do something even better.

Thanks Mr. Hedges and Summit

 

Summit is way better of a catalog then jegs, its nearly twice as big

 

Aw man! I just bought a catback from Summit two weeks ago! Of all the rotten @$%@$%!! Oh well, catback rocks and the service was great to.

------------------
1987 Camaro Sport Coupe LG4
700R4 with 2.73 open rear
Hypertech chip, 180* stat
Dual snorkel air cleaner with K&N air filter
CK rods with B hanger
Hooker catback
Pioneer DEH-P4000, Pioneer speakers front/back

 

hehe figures i just ordered a new set of injectors too, ah well they were still a good deal :-)

------------------
85 POS
92 RS

 

Ive had nothing but awesome service from Summit.. I have put in quite a few orders in the last 2 months, never took more than 2 days for me to receive any of them, GROUND SHIPPED TOO!!!!.. JEGS SUCKS, SUMMIT RULES.. now 10% off, whoo hoo need to empty my bank account

 

hell yeah i order a 40 series flowmaster muffler and 2 3 inch collectors last saturday and i got it today(from jeggs) and to my suprise after 4 days of waiting i only see the collectors. I call up jegs and what do they say the 40 series is discontinued. Then he tells me he can still get me one if i wanted and if i ordered it now i would recieve it monday(i would have to pay 6.99 for handling)get the fuC# out of here. Called summit ordered the 40 series muffler got my 10% off and should be getting it this friday gott admit i luv summit jegs blow, oh yeah did i mention jegs blows

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

Summit rocks! Now, I can spend many more hundreds with them.


------------------

• 1997 30th Anniversary SS LT4 #74 with all SLP options and K&N, white gage faces, and Hotchkis shock tower brace - In process: SFC's
• 1996 Corvette Grand Sport LT4 #509 with K&N, Flowmaster exhaust, Hypertech power programmer, and Baer slotted/cross-drilled brakes - In process: SLP throttle body and 1-3/4" headers, AFR heads, 4.10 gears, custom Panasonic/Alpine/Audio Control/ADS audio system
• 2000 Chevy TrailBlazer

 

Someone mail Jegs and see if they'll give us 30% off. Then at least their prices will be comparable to the prices without discount from Summit.

 

Thank you SUMMIT, you guess are the best. You guys need to put that quote that used to be on the old Car Crafts that says, "Becasue everything else SUCKS"

 

Thank you Summit!! Your catalog should be a bit more comprehensive, I've had to go to Jeg's a few times for that. Doh!

------------------
--Steve S--
1984 Trans Am 305 LG4, 5 speed
Daily Driver, Flowmaster 80 Series
Holley 600 cfm & vacuum advance

 

just used it. yeah!!!!!! wahooo!!!

i love summit's customer service. so far, for every order i have made, i have sent somthing back. i should be a better consumer, but that's a different story. either way, there are still no problems. yes!!!!!!!!!!!

THANKS SUMMIT,
Jesse

------------------
85 Z28, 305 TPI A4
pretty stock with a few toys
15.2@91mph
http://photos.yahoo.com/j_hougnon

http://screamindeamin.cz28.com/images/jesse/

 

Thanks Summit!!!
I always did like you guys better. Especially after Jegs botched my header order, sent me ford headers instead, then took two months of processing to fix the problem. And now I have one more reason to buy from Summit.

Now what should I buy?

 

I ordered all my parts from Summit about 3 weeks ago for my engine swap. Everything from battery to air cleaner, holley TB, to a balancer, spent over $600 and I'm the guy that went over to Jegs in person to present them the print out of the post.
Oh well, now I need a hood, I guess it'll be from Summit again.

------------------
, Jon (350 TBI! getting 23mpg highway)
91 Red RS w/grey int, sq stereo (Alpine v12, kicker solo, MB quart premium etc)

• Holley 670 TB unit w/ 1/2" spacer/adapter
• Edelbrock RPM vortec intake
• 350ho 330hp vortec crate motor
• 8" harm. balancer
• Stewart stage 2 water pump w/160 thermo
• SLP tri-y headers to full 3"
• Rebuilt trans w/ SLP shift kit
• Centerline 16x8's all around
• 36/24 mm sway bars
• Full poly bushings, even motor mounts
• SLP LCA and panhard
• Alston SFCs
• Edelbrock 3 point STB
• Global west steering brace aka wonderbar
• Eibach pro kit springs
• Bilstien high perf. struts and shocks
• All this and I still have AC

My websiteAny questions?

 

Thanks SUMMIT!
Time to order my cats...

------------------
90 IROC 5.7l (L98)
ram air, K&N's, air foil,Flows

LIKE A ROC

 

Yea! Going to place my order in the morning. Anyone got $10,000 I can have. hehe

------------------
'87 Trans Am:
(Engine)
305 TPI
160 Degree Thermostat
TB Bypass
Accel 300+ 8.8 Racing Wires
Accel Super Coil
Bosch Platinium Plugs
Custom Ram Air with K&N
Removed Emissions Equipment & Cat.
(Stereo)
Kenwood Excelon

 

Just read this durring study hall. Guess I can order my roller rockers now. THANKS SUMMIT!!

------------------
Livin the hot rod dream, one day at a time.
lg4
slp muffler
pro flow air cleaner
performer intake
more to come

 

I guess being addicted to this site pays off!

------------------
91 RS W/carbed 350, Vortec heads, performer rpm, Comp cams Xtreme energy 224/230 duration and .477/.480 lift. BFG Drag radials. 3.42 posi,Corvette servoed 700r4, 3000 stallconverter. Edelbrock TES, 3inch cat, flowmaster with single 2.5 inch exit.
Best time yet to come
12's?? :crossthumbs:

This is a Pic of my car in race trim www.tbns.net/billyjay/camero.jpg

Yes I know how to spell camaro- so dont ask. I didnt make the link

 

me too. Ordered full set of draglites. Should have waited. But have to agree, Summit is the best.

 

I placed an order this morning before I saw the notice. Called customer service, they applied it to my order!

Great outfit. Keep it up!

------------------
82 Berlinetta, orig V-6 car, now w/86 LG4/TH700R. 2.93 limited slip. Cat-back from '91 GTA, Accel HEI SuperCoil. AMSOIL syn lubes bumper-to-bumper. Daily driver, work-in-progress (LG4 w/LB9 block, ZZ3 cam and intake, TBD heads, Hooker headers & y-pipe, 3" Catco cat).
57 Bel Air, my 1st car. 0.030 over 396, Weiand Action+, Edelbrock 1901 Q-Jet, Jacobs Omnipack, 1-3/4" headers, TH400 w/TCI Sat Night Special conv & Trans-Scat shift kit, 3.08 8.2" 10-bolt w/Powertrax, AMSOIL syn lubes bumper-to-bumper. Best 15.1 @ 5800' Bandimere. Daily driver while Camaro was being put together.

 

Kewl I think I'll oreder that clutch I have been wanting......

 

Right on Summit!!! glad you have recognized the members of third gen. I got a ton of stuff to get so this Is great timing! Thanks.......bob

------------------
91 camaro RS L03 convert,
t-5, ultimate TBI mods,TBI spacer,SLP 1 5/8 headers,
3"cat back, 3.42 torsen posi,alston SFC's,Global West LCA relocation brackets, edelbrock STB

 

You're killing me! I just ordered my Autoxray about 5 minutes before you posted this! Arrrrrggggghhhhhh!

------------------
Rob P
89RSconvtZZ4TPI
Edelbrock Hi-Flow Intake
SLP Dual Cold Air Intake
1 5/8" Headers
Semi-Siamesed Runners
MSD6AL/relocated MAT/ AdjFPR/IROC frnt@rear swaybar/wonderbar/steeringbox/alum drvshaft/ Alston SFC/3:23posi disc rear/MAC LCA/H.Adams Panhard Rod/KYB struts/ shocks/
92Z28convt5spd
71Impala convt 402BB
BETTER DRIVING THRU SUPERIOR HORSEPOWER!

 

lol. Just ordered my AutoXRay with the discount.

 

Just another thing to top it off, I ordered my cats on thursday morning and they were on my doorstep friday afternoon!!

------------------
90 IROC 5.7l (L98)
ram air, K&N's, air foil,Flows

LIKE A ROC

 

today I ordered a deep pan for the 700-R4 and a B&M servo and a tranny cooler thanks Summit

oh yeah and more to come!

------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT

1983Z28 350w/ edelbrock performer RPM power package with 64cc aluminum heads, dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.

future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.

 

Saved 54.50 on my dads power windows for his truck and rocker arms

 

I think everybody should order from them with the discount cause if they see that we ordered a lot of items and used the discount-they will do this more often or evan better all the time - Im making two orders one today and one friday when I get paid

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"

Here's a couple pics of my car

http://www.geocities.com/jonnyarson/maro.jpg

http://www.iroczdesigns.com/images/camgf.jpg

http://www.iroczdesigns.com/images/cam5.jpg

[This message has been edited by BigMike 92 Z28 (edited April 10, 2001).]

 

That's really cool of them.. I haven't ordered anything from them in a while, I just KNOW there's something in that catalog I can't live without so I better find it and order it this week!

 

my procrastination on getting my kyb shocks and struts paid off. i will be putting in my order tonight...thankyou summit

steve

------------------
91 RS convertible
Check out my WiCkEd RiDe http://members.aol.com/wasboy1/cam.html
Break on the edgeCRUSHER!!

 

I think I have placed three orders since this post. Ah and right after all the Jeg's bashing this is great maybe we should bash Jeg's more often!

------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT

1983Z28 350w/ edelbrock performer RPM power package with 64cc aluminum heads, dynomax shorty headers, 700R-4 with shift kit, 750cfm carb, edelbrock 3" exhaust system, ASCD SS hood, 16" IROC rims.

future mods:
completely done over suspension, black paint with flames, Hurst shifter, dakota digital gauge package, procharger supercharger.

 

That's right, thanks Summit!

 

saved 31 bux, as i said before, jegs blows, summit rules.

BTW this is the first time i have ordered over the phone and not the web and your customer service ROCKS, the lady was super nice.

 

I'm tired, ... I'd buy a line lock kit if I had the money...as much as I'd love to use the 10% I may not be able to

unless of course I decide not to buy anything local which is always a possibility

 

Christmas in April? Ain't this the life!

 

I purchased my first Summitracing product back in 1987, 88? It's that great Hurst Comp+ shifter seen in my signature. They were very good back then and, it seems, even better now!

 

------------------
1986 IROC-Z28 L98 TPI BW WC T-5
Air Foil
K & N
Custom Ram/Cold Air Induction
Koni Gas Shocks
Spohn LCAs and PHrod
Art Houser/Moser 3.73:1 Torsen Diff
Amsoil lubes and oil filter
Flash to Pass feature & 100w Euro lighting
Recaro Driving seat
Hurst Comp + shifter
Random Tech SHF cat