Does this look good or bad?
Does this look good or bad?
What do you guys think of the thing on top of my windshield where it says GTA? It was on the car when I bought it. Should I keep it or scrape it? Opinions appreciated! Matt
Originally posted by llvll4l2c91350
I'd keep it. I wanna put one on mine that says "Pontiac" but haven't been able to find one for the outside. All I see is for the inside which wouldn't work cuz of the rearview mirror.
I'd keep it. I wanna put one on mine that says "Pontiac" but haven't been able to find one for the outside. All I see is for the inside which wouldn't work cuz of the rearview mirror.
get it custom made, i bet it would only cost about $30. i'll get a price for you tomorrow.
Trending Topics
Member
Joined: Mar 2002
Posts: 153
Likes: 0
From: West Haven,UT
Car: 87 SC
Engine: 350
Transmission: t5
You can make your own banner! Try going to a construction company and ask if they have any reflective tape or whatever they put on roadsigns. Get the tape and some sticky paper (to apply the tape) They usally have rolls of it and if your nice they'll give it to ya. Pick the color you want(I've seen blue,red, orange,white) Decide what you want it to say probly GTA for you. And measure and draw your own letters, trace them on the tape and cut it out with an exacto-knife. Pull the letters off and put the non-sticky side on the sticky paper. Place it on your windshield, press on it and pull the sticky paper off. You can make the letters look like whatever you want. The best part is at night the tape reflects and it looks sweet. Another good thing is it's free(hopefully, they may charge a couple dollors for the tape. sorry for the long reply.
Originally posted by chevkid
You can make your own banner! Try going to a construction company and ask if they have any reflective tape or whatever they put on roadsigns. Get the tape and some sticky paper (to apply the tape) They usally have rolls of it and if your nice they'll give it to ya. Pick the color you want(I've seen blue,red, orange,white) Decide what you want it to say probly GTA for you. And measure and draw your own letters, trace them on the tape and cut it out with an exacto-knife. Pull the letters off and put the non-sticky side on the sticky paper. Place it on your windshield, press on it and pull the sticky paper off. You can make the letters look like whatever you want. The best part is at night the tape reflects and it looks sweet. Another good thing is it's free(hopefully, they may charge a couple dollors for the tape. sorry for the long reply.
You can make your own banner! Try going to a construction company and ask if they have any reflective tape or whatever they put on roadsigns. Get the tape and some sticky paper (to apply the tape) They usally have rolls of it and if your nice they'll give it to ya. Pick the color you want(I've seen blue,red, orange,white) Decide what you want it to say probly GTA for you. And measure and draw your own letters, trace them on the tape and cut it out with an exacto-knife. Pull the letters off and put the non-sticky side on the sticky paper. Place it on your windshield, press on it and pull the sticky paper off. You can make the letters look like whatever you want. The best part is at night the tape reflects and it looks sweet. Another good thing is it's free(hopefully, they may charge a couple dollors for the tape. sorry for the long reply.
never thought of that, i suck at cutting though. ;\
Joined: Jan 2001
Posts: 3,188
Likes: 59
From: Conroe, TX
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
I say scrap it. One of the nicest things about a GTA is the sleeper factor. Most people think they're camaros or base firebirds. Little do they know it's an optioned out Trans Am hiding a L98 under the hood. Let the guess what you have, and judge you only by the look of your tail-lights. That should suffice, for the GTA is the king of class.:hail:
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 7,964
Likes: 4
From: Norfolk, VA. USA
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
Originally posted by llvll4l2c91350
I'd keep it. I wanna put one on mine that says "Pontiac" but haven't been able to find one for the outside. All I see is for the inside which wouldn't work cuz of the rearview mirror.
I'd keep it. I wanna put one on mine that says "Pontiac" but haven't been able to find one for the outside. All I see is for the inside which wouldn't work cuz of the rearview mirror.
Originally posted by Zepher
I've got the inside Pontiac one on my car, just need to cut a small hole for the mirror mount.
I've got the inside Pontiac one on my car, just need to cut a small hole for the mirror mount.
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 7,964
Likes: 4
From: Norfolk, VA. USA
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
Easiest way to do it is take off the mirror, mount the banner and then use a razor blade to cut around the mirror mounting plate.
Supreme Member
Joined: Oct 2002
Posts: 1,259
Likes: 0
From: Los Angeles, Ca.
Car: Base Firebird
Engine: TPI 350
Transmission: T56
Axle/Gears: D44
i think that the font is just too bland...it looks like block letters or something that is used in a presentation...the ones you stick to someting like a presentation board
Originally posted by Zepher
I've got the inside Pontiac one on my car, just need to cut a small hole for the mirror mount.
I've got the inside Pontiac one on my car, just need to cut a small hole for the mirror mount.
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 7,964
Likes: 4
From: Norfolk, VA. USA
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
Originally posted by KC10Chief
What's up with the writing on your right headlight cover?!? =) Matt
What's up with the writing on your right headlight cover?!? =) Matt
Supreme Member
Joined: Mar 2002
Posts: 3,445
Likes: 1
From: Huber Heights, OH
Car: 00 TA, 91 Formula, 89 RS
Engine: LS1 / 305 / 2.8, respectively
Transmission: T-56 / auto / auto
lol... just like my car (in progress with bodywork and have paint dust everywhere).... people like to write "deez nuts", "blow me" and the like in there. I wrote "5.0 Liter R<x>ice Eater."
Of course, my g/f writes much nicer notes in there
("I love David", "David is a hottie", etc.) hehe
Of course, my g/f writes much nicer notes in there
("I love David", "David is a hottie", etc.) hehe Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
I think it looks good. It's clean, one solid color, just the right size, and it matches the paint scheme with the car. Now...if it was bright yellow or red.....or something...I would say, take it off....but....I'm likin how it looks on your car. It's there, and to the point.....it's a ++ IMO..
Last edited by Sickness91Z28; Mar 14, 2003 at 10:14 AM.
hey zepher, I know the car has not been on the road for a while, but when it was, have you ever had any problems with that banner? I heard cops bust down hard in VA beach with cars with banners on them, I heard it's a good $100 fine.
biker
biker
Supreme Member
Joined: Aug 2002
Posts: 2,076
Likes: 0
From: Milwaukee, Wisconsin
Car: 1982 Trans Am
Engine: LG4
Transmission: 200C
Axle/Gears: 3:73
Well, I think that three letters is too short to put on the windsheild. But I do like the lettering of Zephers car.
Supreme Member
Joined: Mar 2002
Posts: 3,445
Likes: 1
From: Huber Heights, OH
Car: 00 TA, 91 Formula, 89 RS
Engine: LS1 / 305 / 2.8, respectively
Transmission: T-56 / auto / auto
I'm not typically a big fan of banners, but I don't hate them either.
Subtle ones like that are okay.
Subtle ones like that are okay.
Supreme Member
iTrader: (1)
Joined: Oct 2001
Posts: 1,056
Likes: 0
From: decatur IL
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
Originally posted by llvll4l2c91350
I'd keep it. I wanna put one on mine that says "Pontiac" but haven't been able to find one for the outside. All I see is for the inside which wouldn't work cuz of the rearview mirror.
I'd keep it. I wanna put one on mine that says "Pontiac" but haven't been able to find one for the outside. All I see is for the inside which wouldn't work cuz of the rearview mirror.
good luck
anthony
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 7,964
Likes: 4
From: Norfolk, VA. USA
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
Originally posted by BikertrashDude
hey zepher, I know the car has not been on the road for a while, but when it was, have you ever had any problems with that banner? I heard cops bust down hard in VA beach with cars with banners on them, I heard it's a good $100 fine.
biker
hey zepher, I know the car has not been on the road for a while, but when it was, have you ever had any problems with that banner? I heard cops bust down hard in VA beach with cars with banners on them, I heard it's a good $100 fine.
biker
Originally posted by @ZZKKER
the factory pontiac one that goes on the outside will have the wiper hitting the c. momar has this problem with his, and is starting to wear away, but this is after 18 years, so obviously, you need to have good wiper blades as not to scratch them.
the factory pontiac one that goes on the outside will have the wiper hitting the c. momar has this problem with his, and is starting to wear away, but this is after 18 years, so obviously, you need to have good wiper blades as not to scratch them.
Supreme Member
iTrader: (1)
Joined: Oct 2001
Posts: 1,056
Likes: 0
From: decatur IL
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
Originally posted by llvll4l2c91350
Any pics of that banner? I searched for that name in the readers' rides but didn't see it. I wanna see if it looks any different than the one on Zepher's car.
Any pics of that banner? I searched for that name in the readers' rides but didn't see it. I wanna see if it looks any different than the one on Zepher's car.
the tip of the c is whats wearing, though you cant see it because this was taken before it started to fade.
thanks
Member
Joined: Feb 2002
Posts: 243
Likes: 0
From: Foothills of the Blues
Car: 84 Trans Am Ws6
Engine: 305 LG4 "H.O."
Transmission: wc t-5
my suggestion is make a new one, using this font.
http://www.webmasterdrive.com/fonts/...&font=goodtime
can't get much more factory looking than this.
http://www.webmasterdrive.com/fonts/...&font=goodtime
can't get much more factory looking than this.
Thread
Thread Starter
Forum
Replies
Last Post










