Want a sig pic made? Post here.
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
Labrat, you can't host an image on a passport.NET site. Mainly because it requires a log-in before it'll allow you to download the data. I hate the .NET software.
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
My lord, its beautiful. ^_^
Here ya go.
I am particularly proud of this one. Its a bit different than most signatures I've seen anywhere.
Here ya go.
I am particularly proud of this one. Its a bit different than most signatures I've seen anywhere.
Last edited by FruityOne; May 21, 2003 at 10:25 PM.
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
One hot sig fresh off the grill.
Bad86z, do you have any pictures of the bird in daylight? That image is too dark to recover. Photoshop can do a lot to fix an image, but thats too dark to fix. The camaro will work nice, not the greatest image, but I can fix it. ^_^
When I'm done with the camaro you'd think it was a $10,000 paint job. ^_^
Bad86z, do you have any pictures of the bird in daylight? That image is too dark to recover. Photoshop can do a lot to fix an image, but thats too dark to fix. The camaro will work nice, not the greatest image, but I can fix it. ^_^
When I'm done with the camaro you'd think it was a $10,000 paint job. ^_^
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
Arrow, I can't beleive I forgot to post your sig! I made it, but forgot to post it with the other batch I put up.
Oh well, its slightly cold but I don't think you'll mind.
Oh well, its slightly cold but I don't think you'll mind.
Junior Member
Joined: Dec 2002
Posts: 29
Likes: 0
From: Bound Brook, N.J.
All Hail Fruity one!!! Hey I got a copy of photoshop 7 and tried cutting the cars out how do you do it so well!!!!! I must spend like 2 to 3 hours a nite messing with that program and I walk away every night feeling like I just got my *** kicked!!!!! Fruity you are a photoshop G@d!!!!!:hail: :hail: :hail: :hail: :hail:
Last edited by GTAJIM; May 24, 2003 at 05:39 AM.
Member
Joined: Jan 2002
Posts: 263
Likes: 0
From: Key Largo, FL.
Wow, those are some great sig pics, Fruity One!! I'd love to have one made, should you have the time to do it. Pics of my car are located hereand here . She's a bone stock '92 T/A, LB9, WS6, with a custom built 1.0ghz computer/6.5" LCD integrated inside for mp3's and GPS. (Sorry, no pics of the computer as of yet.... )Thanks in advance for your time!!
Dave
Dave
Last edited by Cargasm; May 25, 2003 at 04:58 PM.
Member
Joined: Mar 2003
Posts: 278
Likes: 0
From: Charlotte, NC
Car: 88/Form 86/Z28 87 Trans
Engine: 305 TBI 305 Carb 350 TPI
Transmission: 700r4 x3
Heres a pic its better than before if you could make me one someone
Last edited by Badazz86z28; Jun 13, 2003 at 07:19 PM.
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
Dunno why your sig didn't show up sydwayz. Its been done for a while now.
For the rest of you who requested them, expect them before next monday. I'll try to get them done in the week, and they don't really take long. But I have HUGE loads of homework for class. MASSIVE loads to do. I have a 10 page paper due tomorow that I've been working on for about 3 weeks now. I still need to do major revisions on it.
Gotta love collage homework!
For the rest of you who requested them, expect them before next monday. I'll try to get them done in the week, and they don't really take long. But I have HUGE loads of homework for class. MASSIVE loads to do. I have a 10 page paper due tomorow that I've been working on for about 3 weeks now. I still need to do major revisions on it.
Gotta love collage homework!
Last edited by FruityOne; May 27, 2003 at 11:43 AM.
Member
Joined: Oct 2002
Posts: 298
Likes: 0
i need one made
that says
new england f-body association
www.nefbody.com
"put your foot down and drive"
"this is f-body country
thanks
that says
new england f-body association
www.nefbody.com
"put your foot down and drive"
"this is f-body country
thanks
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
Someone please make me a sig.....I mean, look at my lame sig pic?
I would like it to say:
Fast83Camaro
1983 Camaro Sport Coupe
Built 4-bolt 350
A4
*hint*: I like the color blue, so try to make the background blue!
Here are some pics.....
I would like it to say:
Fast83Camaro
1983 Camaro Sport Coupe
Built 4-bolt 350
A4
*hint*: I like the color blue, so try to make the background blue!
Here are some pics.....
Last edited by fast83camaro; May 30, 2003 at 02:25 AM.
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
the motor: (I put this pic in my webspace so it wont take up room here on TGO )
) Last edited by fast83camaro; Jun 1, 2003 at 02:25 PM.
Thread Starter
Supreme Member
Joined: Sep 2002
Posts: 1,834
Likes: 0
From: Norwalk, Iowa
fast83camaro-
Please read the very first post that I made...and also other posts made by Andy (MetalliCamaroRS) throughout the thread and see that we are only allowing one picture to be posted on this thread per person. If you want other pictures to be used, please upload them to a hosting site and link to them.
ONCE AGAIN A REMINDER FOR EVERYONE: PLEASE POST ONLY ONE PICTURE ON THIS THREAD. LINK TO OTHER PICTURES THAT YOU HAVE ALREADY UPLOADED TO A HOSTING SITE IF YOU WOULD LIKE MORE THAN ONE PICTURE IN YOUR SIG.
THANKS
-JOSH
Please read the very first post that I made...and also other posts made by Andy (MetalliCamaroRS) throughout the thread and see that we are only allowing one picture to be posted on this thread per person. If you want other pictures to be used, please upload them to a hosting site and link to them.
ONCE AGAIN A REMINDER FOR EVERYONE: PLEASE POST ONLY ONE PICTURE ON THIS THREAD. LINK TO OTHER PICTURES THAT YOU HAVE ALREADY UPLOADED TO A HOSTING SITE IF YOU WOULD LIKE MORE THAN ONE PICTURE IN YOUR SIG.
THANKS
-JOSH
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
Sorry didn't read that....
I put it in my webspace now....
Matt
I put it in my webspace now....
Matt
Last edited by fast83camaro; Jun 1, 2003 at 02:27 PM.
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
I appologize for the delays, but all is secondary in the face of college work. College is king and demands all my time.
I'll get them when I get them, sorry if that sounds rude.
I'll get them when I get them, sorry if that sounds rude.
Member
Joined: Jan 2002
Posts: 263
Likes: 0
From: Key Largo, FL.
Re: Hi
Originally posted by FruityOne
I appologize for the delays, but all is secondary in the face of college work. College is king and demands all my time.
I'll get them when I get them, sorry if that sounds rude.
I appologize for the delays, but all is secondary in the face of college work. College is king and demands all my time.
I'll get them when I get them, sorry if that sounds rude.
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
can I get a sig please. I would like it to say, lost but not forgotten.
the link is www.cardomain.com/id/charlie31603 thanks alot.
the link is www.cardomain.com/id/charlie31603 thanks alot.
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
Originally posted by charlie31603
can I get a sig please. I would like it to say, lost but not forgotten.
the link is www.cardomain.com/id/charlie31603 thanks alot.
can I get a sig please. I would like it to say, lost but not forgotten.
the link is www.cardomain.com/id/charlie31603 thanks alot.
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
Originally posted by charlie31603
some one please make me a sig please!!!!!!
some one please make me a sig please!!!!!!
Fruity One said:
"I appologize for the delays, but all is secondary in the face of college work. College is king and demands all my time.
I'll get them when I get them, sorry if that sounds rude."
So, don't expect a sig so quick, we're lucky there are even people on here who will make them for us!
Fruity One,
Take your time! No rush here at all, whenever you can will be fine...
School comes first just like you said......
Peace,
Matt
Last edited by fast83camaro; Jun 9, 2003 at 09:59 PM.
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
sorry man I was just skiming thourgh the post! go ahead an take your time in school. It's alot more importent then making sigs. sorry if I sounded like I was rushing you guys. Thanks in advance!
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
Finals are next week and I'm studying like crazy, finishing up projects for class presentations, as well as a crap load of other stuff.
Its hard right now, and I might get a weeks worth of free time in which I'll catch up on the sigs when I can, maybe I'll catch up on the sleep i'm missing too.
Money has been really tight recently and I after paying bills, and taking car of school costs I only have $75 to my name, that money has to last me for the next 4 weeks. So if you don't see much of me its because I'm out working my *** off just trying to get buy.
If any of you want go buy Paint Shop Pro, its a cheap and easy image editing program that'll teach you the basics. Just be forewarned, the manual is about 2 inches thick. But don't fret, the photoshop manual is about 3 inches.
Its hard right now, and I might get a weeks worth of free time in which I'll catch up on the sigs when I can, maybe I'll catch up on the sleep i'm missing too.
Money has been really tight recently and I after paying bills, and taking car of school costs I only have $75 to my name, that money has to last me for the next 4 weeks. So if you don't see much of me its because I'm out working my *** off just trying to get buy.
If any of you want go buy Paint Shop Pro, its a cheap and easy image editing program that'll teach you the basics. Just be forewarned, the manual is about 2 inches thick. But don't fret, the photoshop manual is about 3 inches.
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
If the manual is that thick I'll just weight till some can make me one lol
. just take your time in school and hang in there!
. just take your time in school and hang in there! 