Hood pics, post wetsanding...
Thread Starter
Member
Joined: Nov 2002
Posts: 256
Likes: 0
From: Kenner, La
Car: '86 iroc
Engine: lb9 305
Transmission: 700r4
Hood pics, post wetsanding...
I finally decided to fully wetsand my hood today and I thought I'd share some pics. I painted the hood at home but it didn't come out as well as I would have liked so I'm probably going to scuff up the paint and give it another few coats of color and clear. By the way, I'm going to see if I can rent a booth when I do the whole car, does anyone know where you can usually rent a booth? Anyway, on with the show:
Pic#1

Pic#2
Pic#3
Pic#4
Pic#5
Pic#1

Pic#2
Pic#3
Pic#4
Pic#5
Last edited by 123jon321; Apr 18, 2004 at 11:23 PM.
Supreme Member
iTrader: (4)
Joined: Sep 1999
Posts: 1,716
Likes: 0
From: Upland Pa
Car: Camaro Vert
Engine: 355 HSR
Transmission: A4
Axle/Gears: 3.73 S60
Not bad at all. Here is a spoiler I did for a friend of mine Integra. 
Same as you painted it out back of my house .
Kat

Same as you painted it out back of my house .
Kat
Senior Member
Joined: Sep 2003
Posts: 784
Likes: 1
From: New Mexico
Car: 1991 Camaro Z28 5.7 G92
Engine: L98 Tuned Port Injection
Transmission: TH700R4
Axle/Gears: 3.23 Posi G80
Nice choice with the hood!! You are now like 6 of 6 people that have this hood. It is not too popular.
i love that hood. if i had a maro i would have that hood. or if i had a 93-97 ta i would have it. why is the hood fitting so bad on the drivers side by the nose. Is the nose not on all the way of what . But the hood looks cool, when are you getting the rest of the car painted.
Thread Starter
Member
Joined: Nov 2002
Posts: 256
Likes: 0
From: Kenner, La
Car: '86 iroc
Engine: lb9 305
Transmission: 700r4
The hood to fender line is f'ed up because the car was wrecked on that corner and the fender is bowed. Also, the nose is from certifit..... so yeh the fit isnt the greatest and the bowed fender makes it look even worse. I have a used fender I bought from Hawk's to remedy that and I'll get it lined up right when I get the new fender on. I plan on painting the whole car in the next month or two. I have a problem with keeping the shine of the paint. Everytime I wetsand and polish I can get a great mirror like shine, but the next morning after the due dries the finish gets hazy, it doesnt look half as good. Anyone know what I'm doing wrong? I've tried glaze/wax, and nothing keeps the shine for very long.Here's a pic of what I mean, the hazy part on the right is what I did yesterday and the clear part on the left I just did and is what the whole hood looked like yesterday:
Anyone know how I can keep the shine on the left?
And a pic of the wheels I have to go on it just for the heck of it
Anyone know how I can keep the shine on the left?
And a pic of the wheels I have to go on it just for the heck of it
Last edited by 123jon321; Apr 19, 2004 at 04:12 PM.
Trending Topics
Member
Joined: Aug 2003
Posts: 215
Likes: 0
From: Tremont, Illinois
Car: 1999 Trans Am WS6
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
Holy Hell!
I need to do that to my car.
Is it hard? I watched that one Trucks episode when Stacy showed how to wet sand it didn't seem that bad. Do you need to polish afterwards or go straight to wax? Maybe that is your problem with the shine. You didn't polish it before waxing. Hell, I think i just answered my question.
Looks awesome!
I need to do that to my car.
Is it hard? I watched that one Trucks episode when Stacy showed how to wet sand it didn't seem that bad. Do you need to polish afterwards or go straight to wax? Maybe that is your problem with the shine. You didn't polish it before waxing. Hell, I think i just answered my question.
Looks awesome!
Thread Starter
Member
Joined: Nov 2002
Posts: 256
Likes: 0
From: Kenner, La
Car: '86 iroc
Engine: lb9 305
Transmission: 700r4
Thanx for the compliment. I wetsanded,used rubbing compound,polished, then waxed, but apparently I'm doing something wrong because I can't keep it from hazing........
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM






