JFROG

is it hard to tint the back window? or should i just get a shop to do it? found some 2 1/2 % tint at walmart, want to put that on the back and maybe 5% on the sides

Airpak

its quite a pain in the *** =[ id get a professional to do it. dont wanna end up with bubbles and stuff in it. i've tried
wasted 40 bucks.
heh, it is possible, its just very frustrating

MetalliCamaroRS

iTrader: (15)

I would leave it up to a professional. Find a shop that will give you a warrenty and that can tint the whole back window with one piece, not strips. It'll turn out much better and be well worth the money in my opinion.

90firebird

had my car done by a shop... never regretted it. I'm sure its a major pain in the ***... i'd only reccomend doing it if you've got a good amount of experience under your belt...

nolanr0413

just pay someone to do it . That way they can do it in one piece and do it right . I had to go to two places to find someone that would do it in one piece. The first place said they would do it for 80 and they guy just couldnt do it . He said it was the first car he ever turned down in 15 years of work. So i went to another place down the road about 8 miles and they did it for 150 and he said it was the hardest he every did . Usually they like to use two pieces and put the seam on the defroster line. But i dont have defroster so they were forced to do it my way and in 1 big piece . It came out perfect . But just look around and you get what you pay for .

VERTIGO Z28

iTrader: (1)

All the places around where I live wanted 200 for the back and another 75 for the sides.

I ended up doing it myself for 40. It took me a week to do the back window with the rear defrost. Only took 15 minutes per side window.

If you have more time than money I say do it yourself. It's only time!

90firebird

and tons of patience...

kretos

take it to a pro

urbanhunter44

iTrader: (3)

take it to a pro for the rear window, and make them do it in 1 big peice!

As for the side windows, you can do those yourself.