I WANT TO SEE AFTERMARKET HOOD PICS. I JUST GOT THE ASCD DAYTONA TURBO HOOD AND WOULD LIKE TO SEE PICS OF THAT AND OTHER FIBER-G HOODS.

http://www.angelfire.com/sports/niterider/86camaro.html

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels, New Leather seats, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come

 

in the sig

------------------
1984 Z28 350
Never argue with an idiot, they'll just bring you down to their level and beat you with experience
My Web Page

 

USBody RamAir II hood www.usbody.com

Steve

------------------
Steve's Trans Am Temple

 

 

------------------
1992 camaro RS
195cc AFR heads with compition port work milled to 58cc "10.9 to 1 compression"
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.65 full roller rockers
497-510 LIFT 214-220 duration
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf"no fins no screens"
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
accel 8.8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit edelbrock water pump
new best ET 13.5 @104.66
no times with new afr heads hoping for 12's on motor
Nos to be installed soon

 

I hope this works. Geocities is being wierd today. I hope they aren't stopping pic posts.





------------------
92 Formula L98
96 Formula

www.greatbrakes.com
www.zainobros.com
My Cars



[This message has been edited by Chuck Everly (edited February 25, 2001).]

 

.

[This message has been edited by Cody96Formula (edited February 21, 2001).]

 

BAD CAMARO RS...I gotta tell you man, that's one damn fine looking Camaro!

 

Here's mine with the Big Block Hood.

see that 4-door buick in the back ground, I sold that to the boy across the street. That thing would easily take mustang gt's. The boy tore up the engine a month after I sold it to him I miss it RIP.

[This message has been edited by Blue92 (edited February 22, 2001).]

 

HEy Blue 92, is there a way to open up the front of that hood? You know, to get that ram air effect?

I have always liked the big block hoods...
Nice cars guys!

------------------
http://kiztope.50megs.com
92 Rs 3.1/T-5
KYB Shocks and Struts, Blue Streak cap and rotor, neato new radiator!, RapidFire plugs

An overhead console!!
Clarion Head Unit,
Pioneer 6x9's,Cerwin Vega Plate 4x6's
.....
Its slowly but surely coming along....

AIM : Theonekiztope
ICQ: 8787542
Planetarion: 3GFB kiztope of kiztopia-Camera-92RS-A (33:6:14(?))

"No one knows until they learn" Leon Calrinsky (99)

 

hey Blue '92? where did u get those fog lights. I like those. Did those fit in the factory grill spots or did u have to make a cut in them. I want foglights but don't have the grill that accepts them.

 

I think I got the lights at Advance Auto Parts right after I got the car painted. I just cut out an area big enough for the lights in the factory RS grill. I then sanded it smooth and mounted the lights. I thought it gave it an orignal look because everybody else always get a Z grill and then lights.

------------------
http://albums.photopoint.com/j/View?...781&p=29492901 http://albums.photopoint.com/j/View?...781&p=29492902 http://albums.photopoint.com/j/View?...781&p=29495767
"DriveHarder"
Stock 305TBI,
Eibach Sportline Springs,
Koni Struts and Shocks,
SSPE lower control arms and Panhard bar,
Hellwig Rear Swaybar and Energy Suspension bushings.Aluminum Driveshaft. Posi-rear

 

Who makes the big block hood?

 

Who makes the big block hood?

 

Bad Camaro RS: How much was it to install that 350?? Im thinking of doing that to my RS or just getting a 92 with a 350. Not sure if i want to get a '95 LT1 though. I like the '91-'92 better

------------------
1992 RS 3.1L
Flowmaster Exhaust
2 - Kicker XPL
Eclipse 2-Channel Amp
Sony Head Unit
Window Tint

Kill's:
80's Stang 4-Cyl, A few Ricers, Ford Tempo(Weak) All On A Mesh Up Tranny!

 

AT4ta thanks it means alot comming from a fellow 3rd genner
-----------------
as for cost i got the motor and tpi out of 87 iroc for $300 but i rebuilt it "had rod knockin" i used painless harness $300 if u want more details jus email me thanks

------------------
1992 camaro RS
195cc AFR heads with compition port work milled to 58cc "10.9 to 1 compression"
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.65 full roller rockers
497-510 LIFT 214-220 duration
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf"no fins no screens"
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
accel 8.8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit edelbrock water pump
new best ET 13.5 @104.66
no times with new afr heads hoping for 12's on motor
Nos to be installed soon

 

------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html

 

That big block hood is awesome. At least that's what I think. My friends don't like but then again they drive POSs like a SHO and a Maxima so what do they know. I'm going to ask a few more friends that know something about style.

------------------
, Jon (91 RS too many mods to list)
Dale Earnhart, you have done so much, you will be missed.

 

It's a Jongbloed hood, and no, I don't know where you can get one. I got it from a guy who bought it from a dealership that had had it in stock for years. All searches for Jongbloed Development Corp. have come up empty so far too...

 

Here is a pic of my 6" cowl hood from Glasstech.




------------------
1987 Firebird Formula
"It's just like a chick...takes all my money!"

 

Hey Steve, email me back about you ram air box fool. Also I might be interested in buying your hood, maybe. This will be my ride after a few pretty pennies.






------------------
87 FireBird Formula
305 4bbl LG4
K&N Filter
Flowmaster 80 Series
3 inch tips
SingleIN-Dual OUT exhaust
-----Need Upgrades-----
--Give suggestions plz--

 

Found a better one of the hood on my car.

I gotta get the front of the hood lowered. It raises up about half the size of my fingernail.

------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html

 

Did you already lower the stops to the lowest point? If you don't know what I'm talking about then there are height adjustment bolts for the hood. Another idea is that the front end isn't being suported with all the bolts. My car had that problem and the front ground effects almost came off. I had to drill new holes and use zip ties to keep it from moving.

 

dam does that 6" cowl look mean!

 

this is my dayton hood cowl


------------------
i hate slow drivers

 

here is my GTA


[This message has been edited by Ben87GTA (edited February 25, 2001).]

 

ANTI SPEED LIMIT- THAT DAYTONA IS SWEET. I AM WORKING ON GETTING MY PICS UP. MY DAYTONA IS BLACK AND GIVES MY3RD GEN A SERIOUS LOOK. RUSTANGS JUST TURN THE CORNER OR SLOW DOWN OR GET THE HELL AWAY. DO YOU GET THE SAME EFFECT? ALSO THAT 6" COWL IS VERY SERIOUS. ANY TROUBLE WITH VISION?

http://www.angelfire.com/sports/niterider/86camaro.html

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels, New Leather seats, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come

 

Niterider- thanks, i like the daytona hoods alot it really makes a 3RD gen look good. i think there worth the money

------------------
i hate slow drivers

 

Makaveli and NiteRider, thanks for the compliments....and yes, vision is somewhat blocked by the hood, LOL, hopefully I can learn to deal with it.

Ben, that RamAirII hood looks sweet!

Brian


------------------
1987 Firebird Formula

 

My turn to post a Ram Air II hood



New pics coming soon, w/ a Digital Camera

------------------
Houston f-body Member Page
Third Gen Project (New Site)
1989 305 tbi Camaro RS Red/Red
Ram Air II Hood
Flowmasters
Edelbrock Open Element

"Stock?! Theres nothing "stock" about a stock car."

 

Anyone got some Daytona Pics?

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels, New Leather seats, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come