It's almost time to order my cowl hood finally, the problem at hand is where to get one from.. I want a fiberglass hood, and I personally like the look of harwood's hoods, but I'm afraid of the fit and have heard bad feedback and horror stories.. If I don't get a Harwood I'll most likely go with one from ASCD.. Does anyone know what size ASCD makes their cowl hoods in? Anyway, my main question is how good are my chances of getting the Harwood to fit on right? Would I be smart to trust a body shop to put it on correctly? Anyone with Harwood hoods please post your pics! Thanks.

------------------
1991 Camaro Z28
------------------
ENGINE/MECHANICAL MODS:
350 TPI, automatic, Edelbrock Headers, Edelbrock Runners, Flowmaster Exhaust, MSD 8.5mm wires, Autolite Double Platinum Plugs, MSD Cap/Rotar, Random Technology high flow cat, Hypertech Power Chip (160 Deg Thermo), K&N Filterchargers
STEREO MODS:
Pioneer DEH-P6000 Reciever, Q-Logic Dual 10" Bandpass Box, 2 10" MTX Thunder 7000 Subs,
Rockford 250a2 Amp, Infinity Kappa 4x6" plates & 6x9's
Visit my website and see pics at: Frank's 1991 Chevrolet Camaro Website

 

I ordered a bolt on Unlimited 2 1/4" cowl fiberglass hood about 2 weeks ago for $300. The cars I've seen this and their 4" cowl hoods all look and fit good. Here's a direct link to their camaro page:

http://www.up22.com/camaro82.htm


------------------
EVILFACE

88 Camaro
Stock 305 TBI Auto,Flowmaster, Full 3" Exhaust, B&M Megashifter
Runs A Blistering 16.5 @ 81.5 mph

http://www.evilface.com/evilscamaro.htm

 

As much as I'd like to get a hood from Unlimited Products, (Good feedback, great prices) I want a bigger cowl than 2 1/2" and it seems their next one is 4 3/4" (which is way too big for me).. Someone correct me if I'm wrong about their hood sizes..

------------------
1991 Camaro Z28
------------------
ENGINE/MECHANICAL MODS:
350 TPI, automatic, Edelbrock Headers, Edelbrock Runners, Flowmaster Exhaust, MSD 8.5mm wires, Autolite Double Platinum Plugs, MSD Cap/Rotar, Random Technology high flow cat, Hypertech Power Chip (160 Deg Thermo), K&N Filterchargers
STEREO MODS:
Pioneer DEH-P6000 Reciever, Q-Logic Dual 10" Bandpass Box, 2 10" MTX Thunder 7000 Subs,
Rockford 250a2 Amp, Infinity Kappa 4x6" plates & 6x9's
Visit my website and see pics at: Frank's 1991 Chevrolet Camaro Website

 

Does the UP hood bolt on just like the stock one?

 

Here is my car...it has a Harwood hood on it and it fits very nicely...take a look...

<img src = "http://members.aol.com/carndrvr/camaro2.jpg">

 

I have a 4" Harwood cowl on mine. Fit is not too bad. Did not have to shave any or adjust any body parts. Did not fit as well as CRNDRVR's appears to fit. That looks perfect.
Mine has a tolerable .5 inch gap between the front and nose.

 

heres mine whatcha think? fitment wasnt bad more pics at my site




------------------
1992 camaro RS w/ 350tpi
195cc AFR heads with compition port work milled to 58cc
1 3/4 hooker long tube headers
4" mufflex system
custom ED Wright chip
eddelbroc intake base and runners and much more
new best ET 13.5 @104.66 on stock heads
no times with new afr heads hoping for 12's on motor
http://www.nav.to/badass355tpi

[This message has been edited by bad camaro RS (edited April 04, 2001).]

 

Hey Carndrvr I've seen that pic alot and I'd have to say that your car is one of the few ive looked at that has made me "really like the look of harwood" as I stated in the first post.. also my camaro is almost the same color as yours and what yours looks like is the exact look im going for (with different rims for the future when I have money) as well as yours bad camaro (ive talked to you about harwood a little while ago).. It seems to me that everyone here sofar has gone towards harwoods and think they are good... more opinions and pictures anyone? Thanks!

------------------
1991 Camaro Z28
------------------
ENGINE/MECHANICAL MODS:
350 TPI, automatic, Edelbrock Headers, Edelbrock Runners, Flowmaster Exhaust, MSD 8.5mm wires, Autolite Double Platinum Plugs, MSD Cap/Rotar, Random Technology high flow cat, Hypertech Power Chip (160 Deg Thermo), K&N Filterchargers
STEREO MODS:
Pioneer DEH-P6000 Reciever, Q-Logic Dual 10" Bandpass Box, 2 10" MTX Thunder 7000 Subs,
Rockford 250a2 Amp, Infinity Kappa 4x6" plates & 6x9's
Visit my website and see pics at: Frank's 1991 Chevrolet Camaro Website

 

goodmark i think it wsa (Sp?) makes a steel or w.e cowl hood i think wiht ur dimensions. since its steel its suppose to fit real well. i made a post a long time ago, search for 'goodmark' or however its spelled

 

That address is www.goodmarkindustries.com

You can also get a price list from glasstek by calling 630-978-9897. They make a very good 4" cowl. I like how mine fit.

------------------
1984 Z28 350
Never argue with an idiot, they'll just bring you down to their level and beat you with experience
My Web Page

 

CarnDrvr -

Wow... I am wiping my drool off the computer desk right now! That car looks awesome!!! I think that I can say that Camaro is IMHO the best looking third gen I have ever seen.

Almost exactly the look I was going for with mine, and I love that color.

If you don't mind me asking, what size/brand wheels are those? Like I said, that is almost exactly the look I am going for....

-Joel Likness

------------------
- 84 Z28 In Progress (Road Racer)
- 85 S10 350/350 (Drag Racer)
- 85 Nissan 200SX Yes, it's Japanese (Circle Track Car)
- 91 Lumina 3.1 Euro (Daily Driver)
Carolina F-Body Club
NC Third Gen Association

 

CarNDrvr what is the rear spoiler on your camaro called and where can I find one? thanks...

 

His rear spoiler is the Z28 High Rise spoiler, it came on all 91 and 92 z28's.. I beleive Jegs sells them and I think theres also some fiberglass company that makes them im not sure who it is..

------------------
1991 Camaro Z28
------------------
ENGINE/MECHANICAL MODS:
350 TPI, automatic, Edelbrock Headers, Edelbrock Runners, Flowmaster Exhaust, MSD 8.5mm wires, Autolite Double Platinum Plugs, MSD Cap/Rotar, Random Technology high flow cat, Hypertech Power Chip (160 Deg Thermo), K&N Filterchargers
STEREO MODS:
Pioneer DEH-P6000 Reciever, Q-Logic Dual 10" Bandpass Box, 2 10" MTX Thunder 7000 Subs,
Rockford 250a2 Amp, Infinity Kappa 4x6" plates & 6x9's
Visit my website and see pics at: Frank's 1991 Chevrolet Camaro Website

 

Thanks for the info....

 

Hey everyone...Yes the wing is a factory Z28 wing from a '91-92 Z28. The wheels are Boyd Coddington 17x9 in front and 17x11 in rear. the tires are Pirelli P7000 275/40/ZR17 in front and 315/35/ZR17 in back. Thanks for all the compliments. And just so you all know, I am considering selling the car, so if anyone is intersted...check out my other post on here...it tells all about it. It is titled "I AM SELLING MY CAMARO...ANY INTERSTS"