How low do ur SFC's hang?
Thread Starter
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
How low do ur SFC's hang?
I have a Formula... no GFX to hide SFC's...
I recently saw a Formula with some boxed SFC's (not sure which kind) but they were quite visible... so I thought I would post some of my Spohn SFC's...
Here is a standing photo, you can't really see it here (oh yeah, Knight Rider Replica Notchback, work in progress
)
For this photo, you see it a bit, but I was sitting on the ground to take the pic...
Other side, standing photo...
Sitting on the ground pic, same side... still barely visible... Oh & shiny Y pipe compliments of Hooker 2055's and Jet Hot...
One more side shot...
Raf
I recently saw a Formula with some boxed SFC's (not sure which kind) but they were quite visible... so I thought I would post some of my Spohn SFC's...
Here is a standing photo, you can't really see it here (oh yeah, Knight Rider Replica Notchback, work in progress
)For this photo, you see it a bit, but I was sitting on the ground to take the pic...
Other side, standing photo...
Sitting on the ground pic, same side... still barely visible... Oh & shiny Y pipe compliments of Hooker 2055's and Jet Hot...
One more side shot...
Raf
Last edited by luvofjah; Apr 15, 2008 at 12:03 PM.
Thread Starter
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
Re: How low do ur SFC's hang?
If I were showing off, I'd post these!
Member
Joined: Feb 2006
Posts: 269
Likes: 0
From: South East Michigan
Car: 1986 Firebird / 1985 Trans-Am
Engine: 305 4BBL / 383 4BBL++
Transmission: 700R4 / 700R4
Axle/Gears: ?.?? / 3.47
Re: How low do ur SFC's hang?
Could you explain what an SFC is for those of us that don’t know what you mean?
Thanks
Thanks
Thread Starter
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
Re: How low do ur SFC's hang?
Sub Frame Connectors.
Senior Member
Joined: Dec 2002
Posts: 725
Likes: 1
From: Vancouver, B.C.
Car: 87 GTA 120,000k, 90 CRX Si
Engine: 5.7 TPI, 1.6L 16 valve SOHC
Transmission: 700r4, 5spd std
Axle/Gears: 3.73
Re: How low do ur SFC's hang?
thats what SFC stands for...not what they do, which is waht he asked. basically they connect the front subframe to the rear suspension to stiffen the area under the floor pans that are weak from the factory. theey also prevent stress cracks in the corner of the b pillar where the side of the car meets the roof (mainly ttops have this issue). but i would recomend these for any 3rd gen fbody. even the v6's. handling is also greatly upgraded. anyone want to add to this or call bs go for it.
ps i hope that turbo is actually under the hood. ****in sweet.
Last edited by 83Firebird420; Apr 18, 2008 at 11:10 PM.
Trending Topics
Senior Member
iTrader: (5)
Joined: Mar 2007
Posts: 898
Likes: 0
From: Texas
Car: 1987 Camaro
Engine: 5.7
Transmission: 700R4
Re: How low do ur SFC's hang?
Heres mine on my non gfx camaro, I honestly cant even notice them unless i get like eye level, but even then they blend with the car.
Thread
Thread Starter
Forum
Replies
Last Post
luvofjah
Engine/Drivetrain/Suspension Parts for Sale
13
Sep 26, 2015 08:28 PM