GM floor mats
GM floor mats
I was at a camaro show and I was talking to a fellow 3rd owner (he had a rs) and I noticed on his floor mats it said GM. Like the dumb a** I am I forgot to ask where he got them. Any1 know where I can get some like that ?
The dealer. Those are the original floor mats
------------------
87 IROC 350 TPI with less than 10k original miles
93 Z28 Pace Car #494 of 645
86 Olds 442 (All Original)
My IROC Website
Northstar Camaro Club of Minnesota
------------------
87 IROC 350 TPI with less than 10k original miles
93 Z28 Pace Car #494 of 645
86 Olds 442 (All Original)
My IROC Website
Northstar Camaro Club of Minnesota
Joined: May 2001
Posts: 1,427
Likes: 496
From: Pflugerville, Texas
Car: 92 Heritage Camaro Z28
Engine: 350 TPI
Transmission: auto
Axle/Gears: 3.23 Limited Slip
I went to my dealership yesterday to find replacements for my front ones and the are about $50 for the front and $50 for the back.
Hope this helps!!!
Manny
92 z28 (350) with 46k miles, pw, pl, power mirrors and drivers seat, leather, rear defroster, limited slip rear axle, oil coooler, 4 wheels discs and the Heritage package.
Hope this helps!!!
Manny
92 z28 (350) with 46k miles, pw, pl, power mirrors and drivers seat, leather, rear defroster, limited slip rear axle, oil coooler, 4 wheels discs and the Heritage package.
if you have AOL, or AIM, im a person called carpet366,
tell em your a friend of firebretha, and your intrested in a carpet set,
heres some pics.
if enough people want me might be able to do a group purchase, just let me know,
right now theyre 39.99 with shipping i think.
"These mats are heavy duty with over 50 rows of rubber nibs to keep these mats in place.These mats will not move or buckle-Where you put them is where they Stay!! As the pic shows the Fronts are Flocked in high detail with the Firebird Emblem and the rears are plain."
there ya go
------------------
91 FireBird 305 V-8
Edelbrock Catback,
ghetto rigged cold air intake,
"My G/f Once Wanted To Break Up Because Of Competition With The Car."
GheTTo Riggers INC.
We Make Mcgyver look Like Crap
tell em your a friend of firebretha, and your intrested in a carpet set,
heres some pics.
if enough people want me might be able to do a group purchase, just let me know,
right now theyre 39.99 with shipping i think.
"These mats are heavy duty with over 50 rows of rubber nibs to keep these mats in place.These mats will not move or buckle-Where you put them is where they Stay!! As the pic shows the Fronts are Flocked in high detail with the Firebird Emblem and the rears are plain."
there ya go
------------------
91 FireBird 305 V-8
Edelbrock Catback,
ghetto rigged cold air intake,
"My G/f Once Wanted To Break Up Because Of Competition With The Car."
GheTTo Riggers INC.
We Make Mcgyver look Like Crap
Hey, firebretha....I have those floor mats in black. I bought them from the same person off of ebay. They look great in black. I dont like the way they look in gray in that picture. They are very heavy, and will not wrinkle up. I havent put them in my car yet, because I am waiting to redo my whole interior.
Trending Topics
Senior Member


Joined: Jul 1999
Posts: 854
Likes: 44
From: Batesville, AR 72501 USA
Car: '88 Bright Red GTA UPC 81U
Engine: 5.7L TPI
Transmission: 700R4
Axle/Gears: 3.27:1
The "GM" mats were OEM equipment, but are long since discontinued. In fact, all 3rdGen mats may be gone now from the GM parts lists. I bought two sets for the 1991-92 GTAs in the same color of gray as my cars, but it did not match at all. The color and the style were both incorrect, and since my red GTA has let a sheltered life.... I don't think the carpet could have faded that much.....
I'd love to find someone that sells the replacement mats without any kind of logo on them. The little "GM" logos were just glued on..... so they could be conceivably transferred to a new set of mats for an original appearance.
Ideas, anybody?
------------------
Frankie Rider, 2
The GTA Source Page
-----------------------
'88 GTA Red Hatchback - 5.7L/A4
'88 GTA Black Notchback - 5.7L/A4
'88 GTA Gunmetal Hatchback - 5.0L/A4
[This message has been edited by FrankieRider2 (edited June 22, 2001).]
I'd love to find someone that sells the replacement mats without any kind of logo on them. The little "GM" logos were just glued on..... so they could be conceivably transferred to a new set of mats for an original appearance.

Ideas, anybody?
------------------
Frankie Rider, 2
The GTA Source Page
-----------------------
'88 GTA Red Hatchback - 5.7L/A4
'88 GTA Black Notchback - 5.7L/A4
'88 GTA Gunmetal Hatchback - 5.0L/A4
[This message has been edited by FrankieRider2 (edited June 22, 2001).]
<font face="Verdana, Arial" size="2">Originally posted by FrankieRider2:
The little "GM" logos were just glued on..... so they could be conceivably transferred to a new set of mats for an original appearance.
Ideas, anybody?
</font>
The little "GM" logos were just glued on..... so they could be conceivably transferred to a new set of mats for an original appearance.

Ideas, anybody?
</font>
------------------
Jeff
92 Camaro V6, mods: K&N, modified air box, JET chip 2,high performance muffler.
www.camarors.4t.com
<font face="Verdana, Arial" size="2">Originally posted by FrankieRider2:
I'd love to find someone that sells the replacement mats without any kind of logo on them. The little "GM" logos were just glued on..... so they could be conceivably transferred to a new set of mats for an original appearance.
Ideas, anybody?
</font>
I'd love to find someone that sells the replacement mats without any kind of logo on them. The little "GM" logos were just glued on..... so they could be conceivably transferred to a new set of mats for an original appearance.

Ideas, anybody?
</font>
That's what i did - I had a local upholstry shop get me a set - after I got it I found out they are from ACC (Auto Custom Carpets)...he used a swatch to match up the color, and I got them about a week later...
Color is dead on , and I got a pair of rubber "GM" badges off a friends old worn crap grey mats
Cost me about $70 though, but I think it was worth it
The fit is PERFECT on the passenger side floor over the cat.I have plastic over them now too
Nothing like double protection
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Does anybody know if anyone makes mats that are molded to fit the floor? Every mat I've ever had wads up under my gas pedal, and gets totally screwed up on the passenger side because of the goofy shape.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
Jim:
<font face="Verdana, Arial" size="2">Originally posted by Stuart S:
The fit is PERFECT on the passenger side floor over the cat.</font>
The fit is PERFECT on the passenger side floor over the cat.</font>
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Interior Parts for Sale
0
Sep 17, 2015 05:46 PM






