I know how to post pics, but I cant get the sig in pic to work

------------------
DEEP RED 87 IROC-Z
350, 5.7 TPI, auto
Few bolt on mods
-3" Flowmaster catback system
-Accel plugs, wires, and distributor cap
-MSD coil
-K&N Airfilters
-SLP Airfoil
-Brand new paint job
-Hypertech Thermomaster Power Chip
-Hypertech 160 degree thermostat
-Macewen white face overlays
-Xenon Blue bulbs from Macewen
More to come soon!!

Me either but for those that can it looks good. Share the wealth!

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels,new charcoal & gray interior including seats and door panels, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com

It is the same as posting a pic, put the......[ IMG]http://www.yourpage.com[/IMG] ... in the place where you list your mods. Just like above minus the space after the first bracket.

------------------
Jeff
92 Camaro V6, mods: K&N, modified air box, JET chip 2,Dynomax Cat & Cat Back System
www.camarors.4t.com



[This message has been edited by Jiffy (edited August 10, 2001).]

I believe pics WITHIN a sig are not allowed.

Dirk turned them on the other day.

------------------
'86 Camaro Sport Coupe & '88 IROC-Z

Yeah, I asked and said it would be cool if we could use them again, and he agreed!!

IROC, when u are looking at the picture, right click, go to properties, and copy the link. U should get it then, and always put [IMG] and [/IMG].


------------------
89 RS

STILL Looking For:
An 87 IROC-Z28 350 TPI




[This message has been edited by IROCZTWENTYGR8 (edited August 11, 2001).]

Thanks Dirk

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels,new charcoal & gray interior including seats and door panels, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com

Remember to keep the pics relativley small...so they don't become annoying. Just think of a post with 25 replys and everyone has a huge pic....



------------------
Jeff
92 Camaro V6, mods: K&N, modified air box, JET chip 2,Dynomax Cat & Cat Back System
www.camarors.4t.com

Testing my sig.....Thanks guys

------------------
DEEP RED 87 IROC-Z
350, 5.7 TPI, auto
Few bolt on mods
-3" Flowmaster catback system
-Accel plugs, wires, and distributor cap
-MSD coil
-K&N Airfilters
-SLP Airfoil
-Brand new paint job
-Hypertech Thermomaster Power Chip
-Hypertech 160 degree thermostat
-Macewen white face overlays
-Xenon Blue bulbs from Macewen
More to come soon!!

Just a sig pic test

------------------
'82 Z28
LG4 305 .030 over, performer intake, holley street avenger 670, xe 256 cam, tes headers, 3 inch single exhaust, spintech muffler, 14 x 3 inch drop base k&n.

Nice pic "Evil".

Testing a smaller pic.

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels,new charcoal & gray interior including seats and door panels, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com

just testing...

------------------
Z28 -87 TPI
white with T-roof
red interior with leather seats
Wagner Borg rear axel
all options
all stock
check Website for info.


www.musikhuset.org/~po/camaro

testing 1,2,3....testing

------------------
Slayer of the following:
2000 saturn
198? Ford Crown Vic, (no i don't know why he bothered)
1990 Buick LeSabre 3.8
1986 Camaro 2.8
Newer Ford Explorer
Food that makes me sick: RICE
1991 Camaro RS 3.1 V6 5-speed
1991 Z28 Rims with Firestone Firehawks
dual snorkel intake w/ slashed boxes, 2 K&N's
my motto: I CAN'T DRIVE 55

test

------------------
350 with stealth intake, holley carb, 470 lift cam. 700r4 with .5 boost valve, vette servo, tci lock-up kit, B&M megashifter. Richmond 3.73 gears, powertrax locker, timkin bearings, synthetic lube. Custom 3 inch single into 2 2.5 pipes. 1 1/2 drop springs, 1 5/16 solid front sway bar, 1 inch rear bar, custom subframe connectors, custom LCA relocation brackets. Kobel ground FX, current red metallic paint. Lots of other stuff...
82camaro
[ IMG]http://64.21.218.145:85/smallcamaro.jpg[/IMG]

try that again


------------------
350 with stealth intake, holley carb, 470 lift cam. 700r4 with .5 boost valve, vette servo, tci lock-up kit, B&M megashifter. Richmond 3.73 gears, powertrax locker, timkin bearings, synthetic lube. Custom 3 inch single into 2 2.5 pipes. 1 1/2 drop springs, 1 5/16 solid front sway bar, 1 inch rear bar, custom subframe connectors, custom LCA relocation brackets. Kobel ground FX, current red metallic paint. Lots of other stuff...
82camaro

Thanks, it's just a screen capture from a video my friend and I did of our cars.



------------------
'82 Z28
LG4 305 .030 over, performer intake, holley street avenger 670, xe 256 cam, tes headers, 3 inch single exhaust, spintech muffler, 14 x 3 inch drop base k&n.

How do you size a pic?

Willie

You need to get a program like Photoshop www.adobe.com or Paintshop from www.jasc.com

------------------
Nobody ever got cancer from smoking tires!
If you aren't living on the edge, you're just taking up space
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------

1982 Z28 Camaro
305 Carburated
Muncie 4-speed
Other stuff I haven't figured out yet.

test sig

------------------
1989 Pontiac Trans Am
305 TPI
Auto
2.73 Rear
Stock

Planned Mods:
Cam
Ported Plenum
3.42 disc rear
Headers and Exhaust

What Imaging program do you use?

------------------

See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324

Willie, send your pic to me as a email attachment and I will reduce it for you and send it back.

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels,new charcoal & gray interior including seats and door panels, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com

hmmm...mine wont work

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com



[This message has been edited by ScreaminDeamin85Z (edited August 20, 2001).]

Here's your pic.


------------------

See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324



[This message has been edited by jobryan26 (edited August 21, 2001).]

Testing mine.

------------------
90 RS Convertible
Owner: Top-Down Solutions

http://www.sc3gfb.org/members/lonsal.html
http://www.taskerinc.com/gs3/profiles/Lon_profile.htm

testing

------------------
1986 WS6 pontiac trans am
5.0 305 TPI V8
700R4 tranny w/transgo shift kit. borg warner wires,accel cap and rotr,delco plugs, K&N
KYB shocks,dynomax high flow cat,3"intermediate pipe,40 series flowmaster
w/2 3" tailpipes.

"ponys can run but birds can fly"

www.community.webshots.com/user/kernel20

JoBryan, you have a really nice sig, did you do it yourself?

------------------

Here's my shot at it, behold the smallest transam EVER!

------------------

http://www.tcnj.edu/~esposit3
https://www.thirdgen.org/rides/index...ew&rideid=1137
Member of FBS
AOL IM Name: JimmyTime5

• '89 Trans AM, 305 TPI, 5-spd
• '86 Firebird, 2.8, Auto

Just Checkin'


Ken

------------------
1986 IROC-Z Conv't
17x9.5 TT II's w/ 275/40x17's, BMR stb, Lakewood APR, Jamex 1.5" Lowering Springs
ChevyKen's Cars

Administrator @ ChevyWorld.net

testing my sig

------------------
Arthur-