i want to put clear headlight covers on my 90. it's black and i plan to use the crystal clear 4"X6"s. does anyone have a pair of the covers and some pics? how do they attach and how do they fit? i was going to get these, they're $59.00

http://www.youngsfbody.com/inc/sdetail/1937

 

A friend of mine put those on his Z28 years ago. They attached at the bottom by drilling slots into the headlight pocket (permanent damage to your nose). They arent watertight so you will get water and steam in there. Personally not something I would do.

 

I made my own covers and fasten with 1/4 turn fasteners. Will not fly off at any speed.

 

where did you get your sheet

 

Home Depot. I used the 1/4" plexiglass.

 

Do you ahve any closer pictures of those and how they attach? Is there rubber molding around it or am I imagining that in the picture?

 

Nice job... man that looks killer

 

Make me some pwdbychevy!

 

If you are even considering buying from them I suggest you do a search on that vendor...

 

Ill say it! YoungsFbody SUCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! NEVER EVER BUY FROM THEM!!

 

im kinda thinking of buying/making some of these covers, but i dont want to have to do any pernament damage is there any way around it? Thanks.

 

the first pic has different headlights it looks like? how did you do that?

 

i ment that to pwdbychevy

 

That first pic I had pilot foglights installed as headlights. I made holes in the fiberglass header panel and bolted the foglights in place of the headlights. I made plastic frames around the foglights.

 

i had them on mine years ago, one flew off on the highway and i never replaced them