Rear Hatch motor broke...need diagrams
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
Joe,
I just sent you scans from my HELMS 88 Camaro Manual showing how to diagnose & repair the hatch pull-down unit. I also sent you a price list and the instructions from my hatch guide kit. Let me know if you need further help or any repair items.
Lon
I just sent you scans from my HELMS 88 Camaro Manual showing how to diagnose & repair the hatch pull-down unit. I also sent you a price list and the instructions from my hatch guide kit. Let me know if you need further help or any repair items.
Lon
Member
Joined: Mar 2001
Posts: 294
Likes: 0
From: Indianapolis, IN
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
Doug, I sent it your way as well. Lon
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Does yours not even try to move, or will it just not come up? Mine just broke (had to be pulled up) and I fixed it. When looking at it from above with the panel off, you'll see 2 screws on the left side of it that hold it in place. They screw into a plastic piece. The plastic broke on mine, so I ghetto-rigged it with a 1/4" screw and some nuts. Motor stays in place perfectly now.
Thread
Thread Starter
Forum
Replies
Last Post
