third brake light removel?
Thread Starter
Supreme Member
Joined: Feb 2003
Posts: 1,473
Likes: 0
From: chesapeake va
Car: 08 Sierra, 08 Silverado, 91 z28
Engine: 5.3, 4.3, 5.7
Transmission: autos
third brake light removel?
how do u get the stupid thing out? i took the 2 screws out and it is still in there tight, do i need to take the spolier off to get it out? 3 of my bulbs are burned out and it looks dumb with only 2 working
thanks in advance
btw, its a 89 camaro hard top with 3 piece spoiler
thanks in advance
btw, its a 89 camaro hard top with 3 piece spoiler
Junior Member
Joined: Apr 2003
Posts: 90
Likes: 0
From: Mount Forest, Ontario, Canada
Car: 1990 RS
Engine: 305
Transmission: T-5
Believe it or not, yes it just pops out, but sometimes the fibreglass distorts, making it hard to do.
The safest way is to take a piece of coat hanger wire, and make a VERY small rigth angle bend in it, then insert into the screw hole, push to the side you've bent, and pull....voila!
Trying to use a screw driver will really p*** you off when you crack the spoiler
The safest way is to take a piece of coat hanger wire, and make a VERY small rigth angle bend in it, then insert into the screw hole, push to the side you've bent, and pull....voila!
Trying to use a screw driver will really p*** you off when you crack the spoiler
Thread
Thread Starter
Forum
Replies
Last Post