Heater blower motor question
Thread Starter
Supreme Member
Joined: Feb 2003
Posts: 1,473
Likes: 0
From: chesapeake va
Car: 08 Sierra, 08 Silverado, 91 z28
Engine: 5.3, 4.3, 5.7
Transmission: autos
Heater blower motor question
anyone know of any cars that have heater blower motors that are interchangeable with our cars. 4th gens blow much harder than our 3rd gens do, and my s10 blazer had a strong heater blower. What will bolt up there?
Supreme Member
Joined: Jul 1999
Posts: 1,593
Likes: 3
From: out of my mind; be back in 5 minutes....
Car: 1989 Firebird Formula
Engine: Internal Combustion
Transmission: Completed
Axle/Gears: ones that turn.
For a non-AC system:
Almost anything from an early to mid/late 80's GM will bolt in. I've used one from an 81 Impala, also an 87 Cutlass. Make sure the 'squirrel-cage' is the right depth - there's a couple different ones.
Not sure about the ones with AC, but I'd suspect they run along the same lines.
Almost anything from an early to mid/late 80's GM will bolt in. I've used one from an 81 Impala, also an 87 Cutlass. Make sure the 'squirrel-cage' is the right depth - there's a couple different ones.
Not sure about the ones with AC, but I'd suspect they run along the same lines.
Supreme Member
Joined: Jul 1999
Posts: 1,593
Likes: 3
From: out of my mind; be back in 5 minutes....
Car: 1989 Firebird Formula
Engine: Internal Combustion
Transmission: Completed
Axle/Gears: ones that turn.
No noticeable difference to me. I haven't seen a 3rdgen yet that had what I would call a powerful blower system. The one in my old 81 T-bird, you could have used it as a hairdryer...
It must be something in the design of the ducting...
It must be something in the design of the ducting...
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Engine/Drivetrain/Suspension Parts for Sale
3
Aug 13, 2015 08:28 PM




