Found Rust Need Opinions
Thread Starter
Supreme Member
iTrader: (8)
Joined: Jan 2000
Posts: 3,968
Likes: 1
From: Macedonia ,OH
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Found Rust Need Opinions
Found this. Theres a hole 2x2 on each side of the car.
Not my pic but this is the area. Thanks to 85berlinetta2.8
for the pic. I also need to replace outer and inner rocker panels on the driver side due to a hole and replace the front 1/4 on the pass side due to a hole. I also have surface rust around the other front 1/4 and some surface around the rear 1/4's What would be the cost to get this professionally done and also a professional paint job... This is for my GF's camaro.
Would it be wise to look for a rust free body and swap over?
Not my pic but this is the area. Thanks to 85berlinetta2.8
for the pic. I also need to replace outer and inner rocker panels on the driver side due to a hole and replace the front 1/4 on the pass side due to a hole. I also have surface rust around the other front 1/4 and some surface around the rear 1/4's What would be the cost to get this professionally done and also a professional paint job... This is for my GF's camaro.
Would it be wise to look for a rust free body and swap over?
Senior Member
iTrader: (19)
Joined: Oct 2003
Posts: 690
Likes: 0
From: DFW
Car: 1991 Z28 & 1992 Z28
Engine: LB9 & L98
Transmission: T56 & T56
Axle/Gears: 4.10s & 3.23s
There is some stuff called POR rust treatment. It penetrates (lol) the rust and turns it hard as a rock...
Senior Member
Joined: Jul 1999
Posts: 700
Likes: 0
From: Pineville, NC US
Car: An '87 Italian Retard Out Cruisin'
Engine: LS1 install in progress
Transmission: 4L60e
Axle/Gears: 9 bolt
POR 15. Im doing a few areas with it right now on the floor pans. Got the starter kit off ebay for $18.50 to my door, cheapest place I found for any size. search for seller bio-sales if you plan on getting any.
Thread
Thread Starter
Forum
Replies
Last Post
Thornburg
Transmissions and Drivetrain
10
Aug 25, 2015 01:46 AM
