1990 Firebird Dash into 91 Camaro
Thread Starter
Supreme Member
Joined: Feb 2005
Posts: 1,286
Likes: 3
From: Torrance, CA
Car: 1991 Camaro RS
Engine: THE LT1 SWAP SHALL BEGIN!!!!
Transmission: 700 R4
Axle/Gears: LSD! =(
1990 Firebird Dash into 91 Camaro
I went to the junkyard and found a clean looking dashboard from a 1990 firebird also got some interior door side trims from it and a door opening hatch and door lock all for 19.99 at pick your part.
Took the dash home got all excited and took the old camaro dash off and then tried installing the firebird one and to my surprise the holes did not match up and the camaro dash is actually wider in width!!!!! ahhh so my friend had to drill holes in the dash to bolt it on.. now I have about about a inch in a half left of space that can be seen when your outside looking inside the car (winshield) section.
I thought both Firebird and Camaro dashed fitted each other regardless of the year!!???? I guess I was wrong
I'll post some pics later
Took the dash home got all excited and took the old camaro dash off and then tried installing the firebird one and to my surprise the holes did not match up and the camaro dash is actually wider in width!!!!! ahhh so my friend had to drill holes in the dash to bolt it on.. now I have about about a inch in a half left of space that can be seen when your outside looking inside the car (winshield) section.
I thought both Firebird and Camaro dashed fitted each other regardless of the year!!???? I guess I was wrong
I'll post some pics later
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
DAMN IT!!! I have a beautiful Firebird dash for my 91 Camaro too. DAMN IT!!! Anyone wanna trade even??
Supreme Member
Joined: Mar 2000
Posts: 2,028
Likes: 0
From: St. Louis, MO
Car: 85' Firebird (Project), 92' RS
Engine: 2.8L, LS1
Transmission: 700R4, 4L60E
Axle/Gears: 3.42 Open , 10 Bolt (ukn)
this is completely off subject (although i didn't know there were differences until this post) but...you've got a really nice looking matte black camaro, very clean and straight from what i can tell....Question, why do you have those funky looking scoop thingies on it? Think the stock flat hood would be much better looking, or do you have a 502 under there and need every piece of air you can get so it doesn't suck the hood through the intake manifold.
Trending Topics
Joined: Jul 1999
Posts: 1,272
Likes: 2
From: Muskego, WI
Car: 1985 Trans Am
Engine: 350
Transmission: T5
Axle/Gears: 3.70
Yeah the scoops are ridiculous. Unless of course you live in your car and one slot is for mail and the other for the newspaper.
Junior Member
Joined: Aug 2005
Posts: 77
Likes: 0
From: Boscobel, WI
Car: 87 Camaro
Engine: 2.8 MPFI V6
Transmission: T5
He made the scoop-things by himself. I admire his willingness to expiriment.. But dude, they don't look all that great. Toss a stock or IROC hood on 'er.
Member
Joined: Oct 2004
Posts: 288
Likes: 0
From: Connecticut
Car: 94 Camaro Z28
Engine: 5.7L
Transmission: Auto
Axle/Gears: GU5 3.23
Originally posted by Jim85IROC
yeah, those scoop thingies have GOT to go.
yeah, those scoop thingies have GOT to go.
Originally posted by Black85sport
werd
werd
Originally posted by 82knightrider
ditch the scoops dammit
ditch the scoops dammit
Originally posted by Karps TA
Yeah the scoops are ridiculous. Unless of course you live in your car and one slot is for mail and the other for the newspaper.
Yeah the scoops are ridiculous. Unless of course you live in your car and one slot is for mail and the other for the newspaper.
Originally posted by Hexane
He made the scoop-things by himself. I admire his willingness to expiriment.. But dude, they don't look all that great. Toss a stock or IROC hood on 'er.
He made the scoop-things by himself. I admire his willingness to expiriment.. But dude, they don't look all that great. Toss a stock or IROC hood on 'er.
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Everyone needs to quite trashin on his hood, if he likes it then you need to leave him alone...there was already a thread trashin his hood and i bet he doesnt care what any of you think about it. And its also more orginal than most hoods people have on here.(including mine)
Supreme Member
Joined: Mar 2000
Posts: 2,028
Likes: 0
From: St. Louis, MO
Car: 85' Firebird (Project), 92' RS
Engine: 2.8L, LS1
Transmission: 700R4, 4L60E
Axle/Gears: 3.42 Open , 10 Bolt (ukn)
sorry, didn't mean to start things on a trashing bend, always sucks when it turns out like that....i was simply explaining it'd look cleaner, thats all. Originality aside, just cleaner....
Member

Joined: Oct 2002
Posts: 229
Likes: 0
From: Cheyenne, WY
Car: '89 Camaro RS
Engine: LB8 V6 MFI
Transmission: T-5 5-speed
Axle/Gears: 3.42:1
Originally posted by Karps TA
Yeah the scoops are ridiculous. Unless of course you live in your car and one slot is for mail and the other for the newspaper.
Yeah the scoops are ridiculous. Unless of course you live in your car and one slot is for mail and the other for the newspaper.
I wish I didn't have to say so, but that hood looks ridiculous bro... otherwise (to me) it's a kick-*** Camaro.
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Originally posted by Mr_Metal
otherwise (to me) it's a kick-*** Camaro.
otherwise (to me) it's a kick-*** Camaro.
), it sticks out like a turd in a urinal. Joined: Dec 2000
Posts: 2,361
Likes: 2
From: Buffalo, NY
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
getting back tot he topic, I'm really surprised that the camaro and firebird dashes aren't perfectly interchangable. All I see is red X's... can you repost some of the pics?
Supreme Member
Joined: Nov 2003
Posts: 1,296
Likes: 0
From: ohio
Car: 1997 S10
Engine: 4-Cyl 2.2 Liter
Transmission: Automatic
Re: 1990 Firebird Dash into 91 Camaro
Originally posted by Psycho_91Camaro
I thought both Firebird and Camaro dashed fitted each other regardless of the year!!???? I guess I was wrong
I thought both Firebird and Camaro dashed fitted each other regardless of the year!!???? I guess I was wrong
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
i didnt know either until i read this thread now im going to trade mine to a fellow TGO members, Camaro dash. I got lucky
Member

Joined: Dec 2005
Posts: 199
Likes: 3
From: CALIFORNIA
Car: CAMARO RS
Engine: 3.1 V6,5.0 tpi
Transmission: AUTOMATIC, t5
Axle/Gears: one tire fire ,posi disc
Re: 1990 Firebird Dash into 91 Camaro
I GOT AN 91 FIREBIRD DASH IN MY 89 CAMARO JUST HAD TO CUT OUT AND SWITCH THE BRACKETS MY PROBLEM IS THE WIRES THAT GO TO THE BACK OF THE CAR
Senior Member
Joined: Jan 2008
Posts: 272
Likes: 0
From: Moscow Mills, Missouri
Car: Pontiacs, Jeeps
Re: 1990 Firebird Dash into 91 Camaro
I always thought they were the same too, exect the speaker holes anyway. This knowledge blows every ad on ebay away, they all say for Camaro or Firebird.
All I see are red X's too, what gives? I wanna see the mail box, dammit!! lol, j/k
All I see are red X's too, what gives? I wanna see the mail box, dammit!! lol, j/k
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
Exterior Parts for Sale
5
Apr 4, 2016 12:50 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM






