Hey I have an 87 z28 with power windows and don't wanna have to buckle down and pay for new window motors, is there any way to remove the motors and put in a hand crank?

 

I really really really really really wish someone would answer this cuz I wanna do the saaaaame thang....

Thx

<33

 

yep, there's a manual to power window tech article in the tech section... you do the same thing, but reverse. I just put power windows in mine Also, I'd recomend you use rivets to put them in, bolts and nuts are really difficult to use.


Keith

 

I'm gonna need some Linkage please bud thanks

 

I have done the conversion on my Formula, it really wasn't that bad, I removed the power window regulators, and replaced them with manual regulators. I believe it only took 15-20 minutes per door.

 

so all i need to do is take out the window motor and put in the crank from the junk yard?

 

not quite... look at that tech article.. it's the whole window lowering assembly (well, the majority of it). If you see the picture, it'll make sense

 

could u link me the tech article

 

http://www.p71interceptor.com/thirdgen/powerwindows/