88 GTA INTERIOR
88 GTA INTERIOR
im trying to put the inside of this car back together again....i bought it with no headliner on it...its a 88 gta notchback..
..so heres my question....can anyone send me the interior pictures of the inside...mostly the roof-headliner.......and by the seat belts...i think a plastic piece should be around the part that comes out of the roof? and maybe a plastic piece over the back...im not sure.....any pictures of the roof...by the seatbelts...any where......i could use them...hard to put a puzzle back together without a picture......rob........my email is faes@optonline.net
..so heres my question....can anyone send me the interior pictures of the inside...mostly the roof-headliner.......and by the seat belts...i think a plastic piece should be around the part that comes out of the roof? and maybe a plastic piece over the back...im not sure.....any pictures of the roof...by the seatbelts...any where......i could use them...hard to put a puzzle back together without a picture......rob........my email is faes@optonline.net TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
I don't have pics, but the notchback uses the same headliner as the regular cars.
The headliner goes into place first, then install the dome light to hold it into place. The rear panel between the headlienr and hatch hold it in at the back. The sail panels hold it in at the sides. Once that crap is in, you can put the seat belt trim plastic back up. If it's not broken like most are, it'll snap right into place.
In the front, the sun visor mounts and the A pillar trim holds the headliner up.
The headliner goes into place first, then install the dome light to hold it into place. The rear panel between the headlienr and hatch hold it in at the back. The sail panels hold it in at the sides. Once that crap is in, you can put the seat belt trim plastic back up. If it's not broken like most are, it'll snap right into place.
In the front, the sun visor mounts and the A pillar trim holds the headliner up.
Joined: Sep 1999
Posts: 4,353
Likes: 308
From: NJ
Car: 92 Firebird
Engine: 4.8 LR4
Transmission: T56
Axle/Gears: 3.45 9 Bolt
I have a notchback, like Jim said its basically the same as every other interior. Any picture should work for you so use the 
The only difference should be where the hatch struts attach, my car wasnt originally a notch so I had to cut the 2 rear panels that come near this area.

The only difference should be where the hatch struts attach, my car wasnt originally a notch so I had to cut the 2 rear panels that come near this area.
Thread
Thread Starter
Forum
Replies
Last Post
The_Phoenix
Interior Parts for Sale
12
Feb 4, 2016 07:10 AM









