Body General body information and techniques for restoration, repairs, and modifications.

hatch motor problem

Thread Tools
 
Search this Thread
 
Old Aug 30, 2006 | 03:59 PM
  #1  
88BluBird's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Jan 2006
Posts: 56
Likes: 0
From: Bensalem PA
Car: 88 formula
Engine: 305 comming soon a 357
Transmission: automatic
hatch motor problem

Hey people tricky scenerio for ya.. i have a 88 formula I recently replaced my factory hatch with the crappy foam/rubber spoiler with one from a 91 formula and when closed the hatch motor makes a .. i want to say clicking and intermidate humming sound(like when closing) i was wondering if anyone has any ideas as to what could be wrong? the new hatch seems lighter could this be a problem? i would like some input before i go replacing the hatch motor..anyone have this problem? thanks Tim
Reply
Old Aug 31, 2006 | 01:14 AM
  #2  
vap3r's Avatar
Junior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 96
Likes: 0
From: Fitchburg, Wisconsin
is it pulling it all the way down to the same spot it pulled it down before u swapped spoilers?
Reply
Old Aug 31, 2006 | 09:23 AM
  #3  
88BluBird's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Jan 2006
Posts: 56
Likes: 0
From: Bensalem PA
Car: 88 formula
Engine: 305 comming soon a 357
Transmission: automatic
yes it is..it seems to get a nice tight seal..
Reply
Old Aug 31, 2006 | 10:50 AM
  #4  
Stealthy-One's Avatar
Member
 
Joined: Apr 2006
Posts: 389
Likes: 0
From: Washington DC metro
Car: 89 RS
Engine: 2.8
Transmission: 700r4 auto
Axle/Gears: huh?? guessing stock.
is it possibly trying to pul the hatch down to far? I know its a pain, but so is having to replace the assembly if it breaks. you might want to readjust it so that it wont completely close, and see if it still makes the noise. if the noise is gone you know that it was adjusted down to far. slowly adjust it a bit at a time untill you get a good seal but it is not putting to much strain onthe moter and its housing.

I found this out the hard way. dont want you to have to if it is your issue as well.
Reply
Old Aug 31, 2006 | 05:41 PM
  #5  
Scorpner's Avatar
Supreme Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 2,069
Likes: 4
From: MN
Car: 85 SC, 86 Berlinetta
Engine: V6, V8
Transmission: 700r4, 700r4
Ot may be what I fear damaged mine. Check the switch that is supposed to shut off the motor when it reaches the end of travel.
Reply
Old Aug 31, 2006 | 10:27 PM
  #6  
vap3r's Avatar
Junior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 96
Likes: 0
From: Fitchburg, Wisconsin
i just replaced my entire assembly of the pull down motor, ive never had a working one ever since i bought the car 2 years ago, but it makes a moaning sound the entire time its pulling down, i dont think that is anything out of the ordinary, doesnt seem to be trying to pull down too much, not sure about the clicking though, does it click the whole time?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
madsv1000
Interior Parts for Sale
1
Aug 20, 2015 06:45 AM
stalkier
Electronics
0
Aug 13, 2015 12:59 PM
1nastygta
Firebirds for Sale
2
Aug 8, 2015 07:38 PM
3rdgenparts
Exterior Parts for Sale
0
Aug 8, 2015 11:48 AM
z28addict8490
Interior
6
Aug 7, 2015 08:48 PM




All times are GMT -5. The time now is 07:48 PM.