Finally Painting my IROC!
Senior Member
iTrader: (5)
Joined: Jul 2006
Posts: 882
Likes: 0
From: Kentucky
Car: 1979 Z28 / 1990 RS
Engine: Matching 350 / 305 TBI
Transmission: Built TH350, 3000 Stall / 700r4
Axle/Gears: 3.73
Re: Finally Painting my IROC!
i cant wait to repaint my camaro the stock red. That car looks INCREDIBLE!!! Post finished pics!!! nice IROC!
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Tim, Nice Caddy! No more picks till the refinished gold wheels and tires go on! Still working on the interior. Thanks for the replies Guys!
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Ok Tim, when I get the wheels on I'll take some pics. I just got the seat covers in last month. I haven't got them installed yet because I'm busy buying a new house with a much bigger garage. All my Camaro stuff will be in storage till I close on the new house. Should be the end of Sept.
Senior Member
iTrader: (3)
Joined: Jun 2008
Posts: 703
Likes: 0
From: Houston TX
Car: 1992 Rs
Engine: 305 TBI
Transmission: 5-Speed
Axle/Gears: 3.08
Re: Finally Painting my IROC!
Pictures Now! lol we dont care what it looks like mines in shambles and Ill show it :-D
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Just to sand smooth and paint was 3K. I bought all the parts, decals weatherstrip, etc. I did most of the dis and re-assembly. Mikey did all the body work, masking, painting and bought the paint and primer. The wheels to refinish them was about a grand. Total is around 6k not counting new tires and interior($1700) So just off the top of my head I've got about 12k in a car thats now worth about 7K. All this started as replacing the weatherstripping for a daily driver! And beware, new paint changes other things in your life too, like... sell the house and buy a bigger garage with another house!(about 140K) So guys, be careful out there. This car habit ain't for the weak of heart. Seriously, I'm in the middle of moving and all the IROC's parts are in storage, She's sitting in the driveway of the old house(here) waiting for the closing to occur to move to the new garage. My Corvette is in this garage. I got the carpet in and one seat in the IROC and have to work about 30 to 40 hrs overtime to make this all work. So she's not done yet. I'll make it up to y'all with pics later I promise! Thanks Guys!
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Well she finally is off the street in her new home!
Senior Member
iTrader: (5)
Joined: Jul 2006
Posts: 882
Likes: 0
From: Kentucky
Car: 1979 Z28 / 1990 RS
Engine: Matching 350 / 305 TBI
Transmission: Built TH350, 3000 Stall / 700r4
Axle/Gears: 3.73
Re: Finally Painting my IROC!
OMG! Man i want to get mine paint NOW!!!!! i dont wanna wait. Thats beautiful. I cant wait to see the full pics. -Matt
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Yeah, new paint is nice but.. I was becoming the scary old man that would run out on the porch every time I heard a kid on a bike! Now that she's inside I can relax, a little. All my parts are still in storage. I've got to work on the new house and it's killing me. She should be ready for the spring. Thanks guys, and I will post more pics as the process continues.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Pheonix graphics. Don't buy thier install gel though, just use the soapy water method.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Sorry, No shining sun pics. The sun has not come out since election day. GOD help us all. Any how I did get my tires mounted on the "new" wheels. Some pics.
God help us all, the rest of you, Buy ammo.
God help us all, the rest of you, Buy ammo.
Senior Member

Joined: Feb 2005
Posts: 527
Likes: 5
From: Albany NY
Car: 84 Trans AM (sold), 87 IROC, 09 C6
Engine: Lt1 in IROC
Transmission: 5 speeds
Axle/Gears: Moser 12 bolt tru tracker 3.42
Re: Finally Painting my IROC!
car looks great- I noticed they put the black stripe above the gray stripe. My 87 is the other way around.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
The black stripe is actually above a Gold stripe brother! All pics are from my camera/phone, Not the greatest quality. The freaking wheels came out awesome. I found a shop to mount and spin balance the new tires that appreciatted the time and cash I've spent on this project. No scratches, stick on weights, good work. They even apologized for getting soapy water on them when they were mounted. Now I need brakes, I can't bolt those gorgous wheels onto rusty rotors. This thing is never ending! Thanks for the replies!
Re: Finally Painting my IROC!
Your car looks great ! After looking at your car I now miss my old red 88 IROC-Z. I love how you kept it all stock with the stripes and decals. It looks like it just rolled off the showroom floor.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Joined: May 2008
Posts: 1,361
Likes: 52
From: Alabama
Car: 87 GTA
Engine: 5.7 TPI
Transmission: 700r4
Axle/Gears: 3:27 BW 9 bolt
Re: Finally Painting my IROC!
The car looks great, I'm glad you wen't back with the factory look. You'll get that money back one day, it'll just take time.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Wheel collision in Bath? PA. Give them a call! These suckers look better than new! I think they are like $225 a wheel if yours are straight. Shipping is a fortune though. Me, I'm waiting for spring! I put the Sumi HTRZ's on it though (cheaper) Catch ya!
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Junior Member
Joined: Feb 2008
Posts: 47
Likes: 0
From: Third Coast Outlaw(South Texas)
Car: 1987 Camaro IROC-Z
Engine: 383 Carbed
Transmission: 700R4
Axle/Gears: 3.23
Re: Finally Painting my IROC!
Dang! I like that stock color! I was thinkin of Candy Apple Red for my car, but seeing the original stock red all redone, it freakin kicks ***! Great job bro!!
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Thanks, for the favorable reviews!
Re: Finally Painting my IROC!
forsure. here are 2 photos of my car.
im just primering it right now.
but im going to have to redo it all due to scraches and nics
not a biggy. this time i can do it right.
anyways heres what it looks like now. the 2nd photo is what it looks like at the moment.
darn snow


i cant seem to find and easy way to remove the sticky glue/tape they used on the door to keep the bumper trip on.the clear coat on the car was flaking away bad and it was utterly ugly to look at with dull black paint and flakey white all over. after im done painting it. im going to take it to a buddy of mine who owns a detailing shop so im going to take it to him to make the car shine real good
im just primering it right now.
but im going to have to redo it all due to scraches and nics
not a biggy. this time i can do it right.
anyways heres what it looks like now. the 2nd photo is what it looks like at the moment.
darn snow



i cant seem to find and easy way to remove the sticky glue/tape they used on the door to keep the bumper trip on.the clear coat on the car was flaking away bad and it was utterly ugly to look at with dull black paint and flakey white all over. after im done painting it. im going to take it to a buddy of mine who owns a detailing shop so im going to take it to him to make the car shine real good

Yeah. This car deserves to have some shiny treatment again. Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Nothing new yet, got all new emblems and upholstery not installed yet BRB
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Hey, I'm back! Wifey and her family gave me $200 in advance gift cards to finish my brakes! Progress picks coming!
Senior Member
iTrader: (2)
Joined: May 2002
Posts: 504
Likes: 0
From: Hollywood, FL
Car: '88 Black GTA, T-tops, digital dash
Engine: 5.7 TPI w/custom chip
Transmission: 700R4
Axle/Gears: 9 bolt 327 posi
Re: Finally Painting my IROC!
Wow, man. I was checking your pics and the paint job you did on your T/A. It looks amazing! It's great to see teenagers with good taste in cars, like you said. Congrats.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Hey Dave, you must be responding on the wrong thread. Mines an IROC! Check out my pics! More to come, I promise.
J/K Senior Member
iTrader: (2)
Joined: May 2002
Posts: 504
Likes: 0
From: Hollywood, FL
Car: '88 Black GTA, T-tops, digital dash
Engine: 5.7 TPI w/custom chip
Transmission: 700R4
Axle/Gears: 9 bolt 327 posi
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
No problemo Brother! And she will stay shiney, she dosent go anywhere! Get this noise, Advance don't carry rear calipers anymore! I have to buy the kits and redo my own. Dang.
Re: Finally Painting my IROC!
Getting mine painted sometime in the summer. I am getting all little stuff together to try and spread out the cost. I was wondering if you could point me in the right direction for the decal and emblem kit you used. Price and where you got them? Anything you could help me with would be great.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Welcome Jester, the decals came from Pheonix Graphics. I don't remeber the price, I think around $400. The quality is excellent. They are GM resto approved. Whats your car?
Last edited by Eagle223usa; Jun 21, 2010 at 10:17 PM.
Re: Finally Painting my IROC!
I picked up a 1988 Iroc with 68000 miles and got a pretty good deal on it. The one set back was that the paint looks pretty good, but when you get right up on it and look closely you can see the dust in the paint. Its black and gold so the little imperfections really show up.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
The emblems were separate, came off E bay. The sellers name was Ozpont I believe. Technically not an exact copy but real nice. I think they were like 40 bucks.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Started on the brakes last weekend.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Fronts done, working on rebuilding the rear calipers. They were all frozen from sitting.
Senior Member

Joined: Feb 2005
Posts: 527
Likes: 5
From: Albany NY
Car: 84 Trans AM (sold), 87 IROC, 09 C6
Engine: Lt1 in IROC
Transmission: 5 speeds
Axle/Gears: Moser 12 bolt tru tracker 3.42
Re: Finally Painting my IROC!
MAN! looks just like my car!! only one difference......after i finished painting mine i took it to have it inspected, AND of course i lowered it by about 2 inches.......AND the mechanic who drove it in the shop ran the front air dam right into the lift sticking up a few inches off the floor......didn't wreck the ari dam, but it goofed up the paint on either side......i didn't want them painting it so i'll just redo it when i get enough "other" fixes to do.....car look great though!
Junior Member
Joined: Oct 2006
Posts: 52
Likes: 0
From: S.California
Car: 1989 Pontiac Firebird
Engine: Multiport 2.8L V6
Transmission: 700r4 with Shiftkit
Axle/Gears: All Stock
Re: Finally Painting my IROC!
I remember I got a new paint job on my car,2 months later,I got in an accident and the insurance were being stupid so they never fixed it.its a long story.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Sorry to hear that Friguy, insurance company's can suck sometimes. I actually raised my car back to stock hieght just because of stuff like that Hotrodln!
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Hey all, It's Saturday and I got the whole day to work on the IROC! So far I replaced the fuel pump, emergency brake cables, brake lines, calipers. The front wheels are on, the rear diff is still out. I got a new Dynomax exhaust system going on also with a new high flow cat. I'm getting there, Slowly....
Pics later.
Pics later.
Joined: Oct 2007
Posts: 1,375
Likes: 6
From: Wyoming
Car: 1995 Formula
Engine: LT1 350
Transmission: Built 4L60e
Axle/Gears: 10 bolt, Eaton posi, 3.73's
Re: Finally Painting my IROC!
It's a good feeling getting things done on your car. It felt great to get my IROC painted. I chose GM Red Jewel Tintcoat, and it was beautiful, in my opinion. Here's a link to some slideshows of my 87 before and after the GM Red Jewel paint. http://www.slide.com/r/Ov9XNJvF5T9v-...&view=original
Here's a pic of it the day it got home from the shop. I think it looked sweet.

I sold the 87 for $5000.00 and then later bought my 86 because I missed my car a lot.
I'm working on an LT1 swap on my 86 right now. I recently finished cleaning and painting the engine bay. Here's my thread: https://www.thirdgen.org/forums/ltx-...ver-v-8-a.html
Here's a pic of it the day it got home from the shop. I think it looked sweet.
I sold the 87 for $5000.00 and then later bought my 86 because I missed my car a lot.
I'm working on an LT1 swap on my 86 right now. I recently finished cleaning and painting the engine bay. Here's my thread: https://www.thirdgen.org/forums/ltx-...ver-v-8-a.html
Last edited by New2Chevy; Jun 12, 2010 at 12:09 PM.
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Got the exhaust on and the brakes bled. Had a problem with the timing now resolved. One little creep closer to the road. (Legally!)
Thread Starter
Senior Member



Joined: Apr 2006
Posts: 836
Likes: 0
From: Pgh PA
Car: 89 5.7 IROC/95 LT1 Corvette
Engine: All 5.7's
Transmission: 700R4 (Roessler)/ZF6
Axle/Gears: 10 bolt Zexel 3.23's. CTW 17" wheel
Re: Finally Painting my IROC!
Just a bump to keep it current.
Last edited by Eagle223usa; Jul 19, 2010 at 01:48 PM.




