Torque Specifications Rear Hatch??
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 46
Likes: 0
From: Carrollton, Va.
Car: 1986 Camaro
Engine: 350-4bbl-Edelbrock Headers
Transmission: 700R4
Axle/Gears: 2.73
Torque Specifications Rear Hatch??
Have looked all over forum, anyone know what the torque is for the bolts that go thru the glass on the bottom panel(latch area). 1986 camaro Thanks
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Torque Specifications Rear Hatch??
The following from my 85 shop manual.
Panel to Compartment Glass Assembly. CAUTION: Torque of 11 ft-lb must be maintained when tightening retaining nuts, panel to glass or glass breakage and personal injury could result. Personal protection items such as safety glasses and work gloves should be worn to minimize possible personal injury.
1. Tighten retaining nuts in the following order:
Forward center
Rear center
All remaining nuts
JamesC
Panel to Compartment Glass Assembly. CAUTION: Torque of 11 ft-lb must be maintained when tightening retaining nuts, panel to glass or glass breakage and personal injury could result. Personal protection items such as safety glasses and work gloves should be worn to minimize possible personal injury.
1. Tighten retaining nuts in the following order:
Forward center
Rear center
All remaining nuts
JamesC
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
