What's the best way to get raid off rust? I have some on the roof right above the driver pass windows and on the a piller by the front windshield. Also were the battery tray is, and I saw alittle by th passanger side front fender at the top of the wheel.
That the best stuff to use ?

 

To get rid of it, what you'll have to do depends how bad it is. Just a little surface rust you'll probably be able to get away with sanding, grinding, or a wire wheel and then painting. For bad stuff you'll have to cut it out and then weld in a replacement piece.

If you just want to try and stop it from spreading you can get a rust encapsulating product like por-15 or rust mort and cover it with that.

 

Get it clean if the metal is good I use POR15 then prime and paint if the metal is bad I cut weld POR15 then prime and paint.

 

Yea I want to stop it from spreading, I'm not going to paint it for at lease 6 months. So por-15 should work?

 

Yup just follow directions. For small areas get the started kit it is abut 25 dollars comes with cleaner, etcher, paint, gloves brushes ect....

http://www.por15.com/SUPER-STARTER-K...ductinfo/SSKB/

 

So I should clean off as much of the rust as I can right? Then use por-15?

 

Get the scale and loose stuff off then use the cleaner and etcher as directed then por 15 it